• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Tools you waited too long to acquire

Anyone have one of these? Is the reach and clearance ok? Are they actually useful?

Or
I have the Milwaukee. It's not the most powerful thing in the world, but I use it frequently enough that if something were to happen to it, I would replace with another.
 
I have the Milwaukee. It's not the most powerful thing in the world, but I use it frequently enough that if something were to happen to it, I would replace with another.
Same here. It's handy if you have 12 of the same bolt to remove to get a fan shroud off but it's too bulky for a lot of work. It's like trying to use a corncob instead of a chopstick.
 
Anyone have one of these? Is the reach and clearance ok? Are they actually useful?

I have the Milwaukee M12 in 3/8" that I use as the 'power drawbar' on my mill/drill. It is so handy in that role that I sometimes have trouble remembering to use it as a general-purpose power ratchet. 😉

Not really sure what you mean by "reach and clearance". I like the M12 tools as they're lighter weight. Still, the handle is bulkier than a manual ratchet. For doing car work, for instance, it would work sometimes and not others.

HTH,

Craig
 
Anyone have one of these? Is the reach and clearance ok? Are they actually useful?

Or
You can get the milwaukee in either short or long I think. The handle reminds me of the old long black flashlights. Maglites I think. Not the best for trying to get into tight spaces but great if you need to whack something. Or somebody.
 
Anyone have one of these? Is the reach and clearance ok? Are they actually useful?

I got one as part of a set. No complaints. But to be truthful, I've never used it nor had a need to. I prolly wouldn't buy it if I didn't get it in the combo set. But that's not a negative. It's prolly a good tool in the hands of someone else.

I generally love my M12 tools. Their compact size is handy as hell. I actually have two each of the 1/4" drivers and the keyless chuck drill. And I bought a pair of each of them for all 4 of my kids. When you are assembling things or putting screws into wood, it's hard to beat the handiness of a small drill to predrill for the screw and a screwdriver bit in the driver. It's like having two assistants!
 
Anyone have one of these? Is the reach and clearance ok? Are they actually useful?

Or
I have the basic M12 ratchet. Works good in tight spots like brake caliper pins and such. Not a lot of torque on them and I usually need to break bolts/nuts free first, but handy and quick compared to a wrench or standard ratchet.
 
Anyone have one of these? Is the reach and clearance ok? Are they actually useful?

I have a 1/4" Hex version (Milwaukee 2467-20), bare tool that I picked up from Home Depot early last year for US$99. I've used it a couple of times, but my 2505-22 Installation Drill/Driver Kit ("only" US$170 from Amazon about a year ago) has seen more use:

Milwaukee 2505-22 Installation Kit.jpg
Not as good reach, but a lot of options for getting into places.

I have a rarely used, cheap 1/4" air ratchet that lives in the garage and a Craftsman C3 19V Max-Axess ratchet (fits Max-Axess & GearWrench "thru" sockets) that sees even less use:

Craftsman C3 Max-Axess Ratchet.jpg
NOS on Amazon in 2017 for US$40.


Back on track: if I were going to buy a cordless ratchet it would probably be the long-neck M12 1/4" (2559-20), for the smaller head and greater reach.
 
Not a tool but 7018 welding rods. Strong, well mannered, good looking and not a tool. Just like me.
Not as entertaining, but I get a lot of use out of silicone bronze filler rod, at work and home. Tig brazing, torch brazing, and it holds a point well as a pick/probe when you don't want to chew up steel or iron parts, handy stuff.
 
I'm slightly confused how an arc welder cuts steel- that's a new one to me

@phaxtris ? Can a regular arc welder run a cutting rod?

I suppose if you consider a gouging rod a cutting rod, then sure, need lots of juice and lots of air though

What i think Stuart is talking about is using the filler rod as soft pick that wont mar the surface of things like a steel pick would
 
I'm slightly confused how an arc welder cuts steel- that's a new one to me

@phaxtris ? Can a regular arc welder run a cutting rod?
I have used a welder as an ""ad-hoc" cutting tool several times over the years of construction & farming. Living rural as I do, its a long drive to get a new bottle of oxy or acet. when we run out and a "quick & dirty" cut can be made to work sometimes...crank the amps up to max and let the arc melt thru the iron same as it does when your trying to weld something thin and get that damn "burn thru" that wont heal.
The thicker the metal, the higher the amp needs to be, I had a big ol' 450 amp hobart welder available to me and i have cut 1/2 flat bar off with it....but ti sure aint a purty smooth cut like a well set Acet cut will be.
 
I think it was an old Fourny book I found had a number of things an electric welder could be used to do, a couple of carbon rods in the “special holder” for heating stuff. The holder held the rods and a pivoting toggle allowed one rod to be moved closer to the other to maintain a slight distance between them. Could be used to heat for cutting, bending, soldering, possibly brazing.
I need to have a look, might still have the book. It was full of possibilities for a 10-11 year old!
 
They were using a very large Lincoln portable welder to cut off a bale spear. I guess that makes sense, crank the amps and the arcs too hot to weld anything so the slag drops away
 
I think it was an old Fourny book I found had a number of things an electric welder could be used to do, a couple of carbon rods in the “special holder” for heating stuff. The holder held the rods and a pivoting toggle allowed one rod to be moved closer to the other to maintain a slight distance between them. Could be used to heat for cutting, bending, soldering, possibly brazing.
I need to have a look, might still have the book. It was full of possibilities for a 10-11 year old!
I've got an old Forney. FIL said they used to use them to thaw out frozen copper water lines in the winter. Essentially making a 20 foot welding rod, I guess.
 
Back
Top