-
Guest, Help us understand what we can do better in future. Click Here!
Latest activity
-
Tom Kitta rated Brent H's postin the thread Restoration/Repairs on a 10" LD Utilathe - Standard Modern.Sorry for the long delay but lots of stuff going on........ The lathe is mostly re-assembled, but will require a few fabrications and...
-
Johnwa replied to the thread Restoration/Repairs on a 10" LD Utilathe - Standard Modern.Brian Do you have a source for the drawings with gear specs. The manual I have just gives the number of teeth. I’ve also never been... -
Tom Kitta replied to the thread Craftex milling machine.That is very interesting - I always though ON was at least 20% less then AB but you are proof that it is not so - at least not in the...
-
trlvn replied to the thread Craftex milling machine.Ontario prices may be higher than you think. This is the third RF-30 type mill that has sold in the last 3 weeks. The most comparable... -
BBrent H replied to the thread Restoration/Repairs on a 10" LD Utilathe - Standard Modern.There is one odd ball gear.......... well 2. One is a bronze gear (part 11 on feed gear train assembly): 12 tooth tumbler gear and part...
-
I've poured a concrete base for my large drill press and that gave it the increased height and stability it needed. I used carriage... -
Tom Kitta replied to the thread Craftex milling machine.It feels to me that in ON you paid a bit too much for it. Bidding at $1500 would put it into new category for this mill sans DRO / power...
-
trlvn replied to the thread Craftex milling machine.My winning bid was $1,002--apparently that "2" made all the difference! But with buyer's premium and HST, the total was almost $1,300...
-
Every time I watch videos like that I want to pack up my shop and haul it to the dump. -
Johnwa replied to the thread Holy Cow - This Guy Has Skills.Every time I watch videos like that I want to pack up my shop and haul it to the dump.
-
Johnwa replied to the thread Restoration/Repairs on a 10" LD Utilathe - Standard Modern.I cut my gearbox gear to 14DP, 14.5 PA. The gearbox gears seemed to mesh properly with the rack on my Southbend lathe so I measured the...
-
DDennis P replied to the thread "New" machine day HLV-H.PeterT got it right, need to build a Rotary phase converter sometime soon. Cleaning up better that I thought it would, but looks like...
-
RobinHood replied to the thread Surface Grinder Improvement (Ingar RT-618-2A).Hi David, the machine was a Kijiji find. I believe it came from a High School shop that got cleared out. The fellow I got it from had no... -
RobinHood replied to the thread Restoration/Repairs on a 10" LD Utilathe - Standard Modern.That makes a lot of sense. So it appears that inside the headstock - at least for all gears associated with driving the spindle - they...
-
YYCHobbyMachinist replied to the thread Craftex milling machine.So what did it end up costing you (less moving it)? DRO and x-axis power feed. NICE!
