DavidR8's shop shenanigans

DavidR8

DavidR8

Scrap maker
Administrator
Moderator
Premium Member
Dan Dubeau said:
You're not the only one. I've had a few "final" layouts of my shop over the years. I'm on the last one now though...

Looks great David, Bring on the projects.
Click to expand...
Thanks Dan.
Here's my project list in no particular order:
-Slow speed carbide grinder a la Stefan Gottewinter
- Make two change gears for the fellow who bought my Clausing
- Build a pantry cabinet for the kitchen
- Build rolling stands for miter saw and thickness sander
- Get CB360T running and out the door
- Build cabinets for lathe base and mill base
 
Last edited:
jcdammeyer

jcdammeyer

John
Premium Member
DavidR8 said:
Thanks Dan.
Here's my project list in no particular order:
Click to expand...
Let me see... Let's number them...
DavidR8 said:
1: -Slow speed carbide grinder a la Stefan Gottewinter
2: - Make two change gears for the fellow who bought my Clausing
3: - Build a pantry cabinet for the kitchen
4: - Build rolling stands for miter saw and thickness sander
5: - Get CB360T running and out the door
6: - Build cabinets for lathe base and mill base
Click to expand...
Where are the other 42?
 
Doggggboy

Doggggboy

Ultra Member
DavidR8 said:
All the major pieces are in their new locations.
Still need to build the lean-to for the compressor and dust collector then I will have reclaimed all the floor space.
Everything is on wheels except the metal and wood lathes, jointer, drill press.
Need to build new rolling stands for the miter saw and the thickness sander.
Lots of tidying up to do but it feels much better now.
Click to expand...
What kind of castors are on the toaster oven table?
 
D

Dan Dubeau

Ultra Member
DavidR8 said:
Thanks Dan.
Here's my project list in no particular order:
-Slow speed carbide grinder a la Stefan Gottewinter
- Make two change gears for the fellow who bought my Clausing
- Build a pantry cabinet for the kitchen
- Build rolling stands for miter saw and thickness sander
- Get CB360T running and out the door
- Build cabinets for lathe base and mill base
Click to expand...
I quit writing them down lol. I WAS working on a 2x72 belt grinder (finally), as I finally got my big tools in a nice layout I could work with, then went and bought a surface grinder which now occupies the spot where the belt grinder would have gone......So I've stalled it for now, and got sucked back into some house projects for a while....Ugh. Looking forward to seeing the grinder and lathe base. Two projects on my list as well.
 
You must log in or register to reply here.
Top