Ammco 6" Metal shaper

[gerritv]

https://terranovasteel.ca/product/dura-bar/

Call first, they don't have off cuts.

 

[Downwindtracker2]

My 6" shop-built is made of steel. The clapper box is as well. On the factory machines, the pin is tapered and removable. In my reading, they made a big deal about it. I haven't checked mine.

 

[TonyK]

My 6" shop-built is made of steel. The clapper box is as well. On the factory machines, the pin is tapered and removable. In my reading, they made a big deal about it. I haven't checked mine.

Yes it is a tapered No.5 taper reamer. I have up to #4 reamers but no #5 and had to order a #5.

TonyK.

Grimsby Ontario Canada.

 

[140mower]

If you can't find anything local, shoot me a pm. I can probably help you out with a bit of ductile cast. Unfortunately, we are on opposite sides of the country, so shipping might be a little bit......

I can't add pictures to a pm....
Pretty sure that a flat rate box will be cheapest, at which point I am thinking that I will cut off 4.5" so you have room to screw up once.
Then when you nail it the first time you can send the other half to susq if his is in need. of course, if you need the second piece he'll have to make his own deal with the devil.

 

[TonyK]

Looks good, see PM.

Thank you very much.

TonyK.

Grimsby Ontario Canada.