Dan Dubeau
Ultra Member
Thanks for the tip. Never thought about trapped air in that way, but you can bet I will now lol. Makes total sense. Not that it would matter for this, but good practices are never a bad thing to work into ones work habits.
-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Welcome to Westwood Metalworks, What is he building in there?
- Thread starter Dan Dubeau
- Start date
Dan Dubeau
Ultra Member
Pattern all cured, i wanted to check it on the lathe again
Yep, should be able to get it all on the lathe. Still want to try the r8 arbor though.....
Next was to cut the spru. It DID get used....
Done. I'm going to try filling some holes and making some fillets with wax, and see if I can smooth it up a bit. Debating on the drywall compound coating. Some say it's not needed, others swear by it. If I don't use it, I can cast this today....if I do, it'll be next weekend probably.....
Yep, should be able to get it all on the lathe. Still want to try the r8 arbor though.....
Next was to cut the spru. It DID get used....
Done. I'm going to try filling some holes and making some fillets with wax, and see if I can smooth it up a bit. Debating on the drywall compound coating. Some say it's not needed, others swear by it. If I don't use it, I can cast this today....if I do, it'll be next weekend probably.....