• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

cnc

  1. SparWeb

    CNC Router alignment

    Still getting my CNC router dialed in. Thanks to many forum members, for your help so far. https://canadianhobbymetalworkers.com/threads/motor-acceleration-between-master-slave.9626/#post-137423 With some free time over the holidays, I set about making sure it's well calibrated. Mostly it...
  2. SparWeb

    Motor Acceleration between Master & Slave

    Hello, I've been enjoying my CNC router table since getting it several months ago. The holidays have given me time to try some more ambitious projects, and get tighter tolerances on parts. I knew this is when limitations or problems would show up, but no disasters so far...
  3. Wes D.

    YYC: Wazer Waterjet Cutter

    Wazer Waterjet Cutter (https://wazer.com/) purchased in 2019 and with approximately 250 hours. Pump oil changed after the initial 50 hours. *** Please check the input water specifications before considering: https://wazer.com/product/tech-specs/ *** The machine needs a fairly consistent supply...
  4. Arbutus

    Troubleshooting help - CNC control signals?

    I have two MCUs, a Teensy 4.0 and a Teensy 4.1. Both run at the same 600MHz (!) speed. T4.0 generates a signal to control a stepper motor (Pulse+/Direction+). T4.1 receives that signal and synchronizes another stepper to pulse its motor once per N pulses received. Observing the output signal...
  5. SparWeb

    Anybody still using Mach3?

    I bought a CNC router! It's old! No it's not that bad, but it's a DIY project that the guy has picked at for almost 20 years. Still works, and tonight I have cut wood by jogging the cutter, just trying it out. Learning as I go. The CNC software is installed on a geriatric Windows XP computer...
  6. Richard Tymko

    Pocket NC (5 axis desktop cnc)

    Ok I really need to sell this thing... https://www.kijiji.ca/v-view-details.html?adId=1634282698
  7. P

    Tormach PCNC440 CNC Mill - Calgary

    Hi guys, I have an almost BRAND NEW Tormach PCNC 440 for sale. Would prefer to have buyer pick up in Calgary, but will entertain shipping. Thanks for looking! 2021 Tormach PCNC 440 CNC Milling Machine - Basically BRAND NEW (about 20 hours cutting time) - Includes chip tray - Includes...
  8. P

    Dyna-Phase 25HP Phase Converter - Calgary

    Dyna-Phase 25HP rotary 3-phase converter - converts single phase 220/240V power to 3-phase - purchased used in 2017, and it was not used much in my possession - runs very well - HEAVY! Must bring engine hoist to load into a truck - Located in Calgary -$1500 OBO
    • porcelainrocket
    • Thread
    • 220v 230v 240v 3 phase cnc electrical phase converter single phase
    • Replies: 8
    • Forum: Classifieds
  9. Nesh559

    Syil x3 cmc mill questions

    Just wondering if anyone has any experience with the syil x3 cnc mills? I have a line on one but I dont know that much about them. Are they any good? Also what do you think would be a fair price for one.
  10. Nesh559

    Syil x3

    Just wondering if anyone has any experience with the syil x3 cnc mills? I have a line on one but I dont know that much about them. Are they any good? Also what do you think would be a fair price for one.
Back
Top