Recent content by Desab

what size are your holders?

I buy my aluminum at samual metals 20 footers and they dont cut

Chop it up and make some tool holders for QCTP

Cant have to many tool holders I use CXA, 19 total bought some and made some

new info on gear change. top 38 meshes with 46 tooth behind 80 which meshes with 120 to 90 the gear in front of the 120 which is a 30 tooth coarse does not mesh with 38 or 46 Gears Z80,Z90,Z120 are Module 1. Gears 38 and 46 are unknown (i don't think they are metric) the single gear 30 i...

thanks for the heads up i thought it was me again

Any idea why my pics are coming sideways

One more thing the diameter of the gears are tooth count +2 eg 90+2= 92mm

Im not sure if this will help, I measured QCGB per 1 revolution the carriage moves as per my list attached. the fine gears are module 1 BTW I have tried and still trying to locate a manual, the manufacturer is Jinan First Machine Tool I have email them several times but no reply. thanks

can you guys read the gear tooth count on the cardboard box. i altered the faceplate.

Attached pic of my gear train, I can only cut threads section F 36 thru 3, i have zero info for this lathe, my quest is to cut proper change gears for threads and feed listed, doesn't seem to have a lot of options. it appears as there are 2 spots for extra gears "oops all the pic are rotated

I bought the modern 1440 a while back, my buddy bought the grizzly they were almost the same price at the time the grizzly was way heavier an rigid compared to modern. i sold it and bought an older 16x40 just my two cents

Ok i have 8 mm x 7.6mm being the dia. 8 mm x10.2 9.15mmx 14.8 Sorry no 3/8

Well i had a look at the spec the far right column are item numbers

i have quite a few let me know the dimension