Web thinning is done on the back hole and the front hole splits the point.
That's very odd. Which way is the wheel oriented - smaller OD out or in? And which hole is furthest out - the front hole or the back one?
Web thinning is done on the back hole and the front hole splits the point.
You must have jumped on the same sale I did. I am also now a 13D Owner.Just picked up the "D" model. Works like a champ.
They're effectively giving you depth adjustment by moving the holes closer and further from the wheel axis. To adjust it, you need to adjust for the closest hole first, and then adjust the rear one. That's fine if everything is going to stay in place long term.. but the issue is you cant adjust the front without effecting the rear. Also if you ever need to remove that top plate you would loose all your adjustments as there are no dowels or match marks.Very nice. I see that it does both web thinning and split point. But I don't see a mechanism for adjusting it other than sliding the entire top block sideways. That seems odd to me. Is there more to it than what we can see in your photos?
I was also surprised that the D was not just a combination of the A and B w/pivots, like that Motom (Sp?) brand one is, but is a unique design. I think it's a cost thrifted design, but seems workable.
I found my drill angle sharpening was great right out of the box, as everyone's seems to be, but the upper holes were not doing much so I've started adjusting.
I was going to buy the A model, but I found the D for $330.90 on vevor.ca and I found a coupon code that worked. Looks like the sale is over. I was also amazed by the shipping speed. I ordered it at 11:30am one day, and received it by 10am the next day.If I may, what did you pay for it and where was the sale?
I found the D for $330.90 on vevor.ca and I found a coupon code that worked. Looks like the sale is over. I was also amazed by the shipping speed. I ordered it at 11:30am one day, and received it by 10am the next day.
Looks like it shipped from Caledon, ON. They used UPS, and there were no extra fees.@Abaddon8k - congrats on the new tool.
Questions for you:
Where did it ship from?
Who did they use as a shipper?
Were there any extra fees?
Looks like it shipped from Caledon, ON. They used UPS, and there were no extra fees.
I am in Windsor, ON
what did you pay and where did you buy from?OK, add me to the list MR-20G owner now. Figured go big or go home - I tend to break small bits so only have the bigger ones left to sharpen!
Now to learn to use it, basic sharpening seems ok, but the web thinning seems off - cuts into one side of the drill only. It could be the 3/4" MT3 drill I'm using - it looks like it was forged (!) so might be less than straight, I'll try another drill before I mess with the machines settings.
Practice a bit with various size drills. If you find it's consistently wrong then something is out of adjustment. I had to do a lot of work to get mine to work correctly. Somewhere there's a thread on that.OK, add me to the list MR-20G owner now. Figured go big or go home - I tend to break small bits so only have the bigger ones left to sharpen!
Now to learn to use it, basic sharpening seems ok, but the web thinning seems off - cuts into one side of the drill only. It could be the 3/4" MT3 drill I'm using - it looks like it was forged (!) so might be less than straight, I'll try another drill before I mess with the machines settings.
Now to learn to use it, basic sharpening seems ok, but the web thinning seems off - cuts into one side of the drill only.