Wouldn't counseling be a more practical solution ? 😛I have four cats (down one from five a year ago), and the press really cuts down on trips to the recycling depot...
Wouldn't counseling be a more practical solution ? 😛I have four cats (down one from five a year ago), and the press really cuts down on trips to the recycling depot...
Do you find the Xcelite drivers smell like puke? We have them all over work, in almost every toolbox and they all smell like vomit. It's effing weirdFor my birthday when I was about 15, I asked for nut drivers and was rewarded with the color coded Xcelite set. I have been using them ever since, great set.
More recently I picked up a Wera metric set.
No tool junkie should be without 😉
No smell. I also have 5 of the mini/stuby sets; nutdrivers, Allen drives, screwdrivers etc. none of them smell, but they are all most likely decades old. The small sets are in a drawer at my electronics bench where I use them all the time.Do you find the Xcelite drivers smell like puke? We have them all over work, in almost every toolbox and they all smell like vomit. It's effing weird
Yup, I've got Xcelite tools from the 90's and they do smell like crap. It's like the cheap rubber that stinks like sour oil and it takes forever to go away.Do you find the Xcelite drivers smell like puke?


How do you use the angle with a kitchen knife?Diamond whetstone 300/1000 grit. Why didn't I get one of these long ago? I printed some angles 15,20,25 degrees as guides. Kitchen knives are much sharper now.
You just use water, and an eraser cleans it up after. I don't think you can wear a dish shape into it. Anyone have those chisel or other tool angle jigs for use on a stone?
View attachment 76692
it's not super accurate. I put the knife on the guide and try to keep it at that angle as I draw it across the stone.How do you use the angle with a kitchen knife?
I have one of the wood chisel jigs from Lee Valley. Works like a damn.Anyone have those chisel or other tool angle jigs for use on a stone?
Do you move it across the stone too? Like guide moves along the stone?it's not super accurate. I put the knife on the guide and try to keep it at that angle as I draw it across the stone.
So the edge of the blade runs on the same spot of the stone? Trying to get my head around this.No, I just put it there on the angle to start. you can see the elastic band holding in place. But maybe a wide version with some sort of attachment to the knife could work. magnets?
I’m surprised they passed safety inspection without turn signals on the side.Slonik – 1000 Lumen LED USB Rechargeable Headlight
View attachment 66144
Mostly for automotive work but I have found other opportunities to use it.
Very comfortable and adjustable. Much superior to other headlamps I've used. So much better I went from disliking a headlamp to can't imagine doing certain jobs without it.
Slonik Headlamp
There's a handful of techs who have something similar at work...freakishly bright and mildly annoying when they forget its on and walk in to the parts room and high beam a guySlonik – 1000 Lumen LED USB Rechargeable Headlight
View attachment 66144
Mostly for automotive work but I have found other opportunities to use it.
Very comfortable and adjustable. Much superior to other headlamps I've used. So much better I went from disliking a headlamp to can't imagine doing certain jobs without it.
Slonik Headlamp
There's a handful of techs who have something similar at work...freakishly bright and mildly annoying when they forget its on and walk in to the parts room and high beam a guy
I've got one of the flexible band types and I love it.
Best if kept on low power tho...the bright level tends to make it run hot and your forehead gets all sweaty lol