"Oh, how can you be in,
Two places at once when,
You're NOT ANYWHERE ATTTTT ALLLLLLLLLLL. . . "
Updates since I last posted:
Those blocks WERE indeed squared, split, hole positions marked with the lathe cross slide, drilled on my little press, then filed and blued for mounting my linear stage.
After getting that very time consuming, irritating component of my die engraving process sorted, the next most time consuming component was the polishing of their faces, to a mirror like surface.
As you all know, a lathe can only face a slightly concave feature, even on its best day, so polishing these blanks off the lathe involved several files, and A LOT, of polishing on stones. . .
Half of my desire for a shaper/planer was driven by this very harsh reality, with the knowledge a very well honed finishing tool, could create a flat, mirror-like surface. . .
WELL it happened, I am officially an Atlas guy, I got my second Atlas machine and did the ole teardown and rebuild. Unlike the mill, and my lathe before, I had a lot of experience in these matters, and the tools to do it in well, I'd say probably 1/3rd of the hours it took just to teardown the mill!
I can not praise cheap ultrasonic cleaners enough!
Also unlike the MFC Mill (still in pieces, a lot of them primed, will wait till warmer weather to get back at it) this shaper's paint was actually not that bad off, and there was little or no concerning corrosion or damage hidden under grease and zinc pested parts! While I am not crazy about it being green and some yellow - the grizzly lathe has a friend now!
I will say, one of the things I like about having a machine that has already been through someone else breaking its handles and putting awful sheet metal doors on it . . . is I feel absolutely no guilt about chopping her up for parts, or playing games with putting electronics on it! Same goes for the mill, if these were both nicely cared for unmodified machines, I would be less eager to dirty it with chinese stainless hardware, but these are going to be USED. End of the day the shaper surfaces are all fairly pristine, some wear on the ram ways but otherwise, everything is running extremely well, quietly, and accurately!
Oh the rubber matt under the bench is recent, I went a little down the rabbit hole of soundproofing things so nobody in the building knows I am a freak whacking steel bits together at all hours. . . that in of itself deserves a whole thread I think. Its amazing to realize all my stuff clocks in around 50db now, what a little extra carpet and tightening some woodscrews can do!
"Well goodbye for now friends, and happy motoring back on the freeway.
Which is already, IN PROGRESS."