standard modern 9 inch utilathe 1960 approx model part needed

[YYCHM]

I don't know what to say about that? You're certainly thinking out side of the box. If it works it works. Good for you.

 

[ken holliday]

i also have found the system my brother in law used to turn the lathe into a sort of milling machine, used it to cut key way in shaft,and then also used it to cut slots in ( excuse me i know this is not recommended)wooden cooking tool called "sprudel" it is like a flat wide spoon with slots in it. Go slow. make no saw dust, keep the vacumn on collecting grindings

 

[ken holliday]

due to mobility handicap, i am not able to continue to use my lathe, i have gifted to a family member, I inherited it from my brother in law and it goes to his nephew. His name is Josh David Grabka, he is a high pressure welder and a tool and die maker in training. He will finish the course this month. He is in Regina , I will suggest he join the forum.

 

[YotaBota]

Sorry to hear your unable to continue with the sport, sounds like the machine is going to a good home.
Hope to hear from Josh and get some pictures of his setup.

Take care and we wish you all the best.