Some pics.Is that the parting tool? A pic would help.
7/16 should be either 14 tpi or 20 for NF I believe..................Chawbeef
According to my Starrett thread guage it is 16 tpi..........................ChawbeefAre you sure it's not 10mm x1.5 pitch.
3/8=9.525mm
25.4mm/1.5mm = 16.93TPI
7/16 should be either 14 tpi or 20 for NF I believe..................Chawbeef
I've never seen a 7/16 X 16tpi before. I also see the nut has an integral washer. Cool....................DanielRead the article I linked to. The original nut was 7/16-16. https://www.wisconsinpartsdatabase....haper-tool-holder-parts-armstrong-ace-2060.pl
Here is a 7/16-16 tap and die set. Make your own nut.
7/16-16 Tap And Die Set, UN Machine Thread Tap And UN Round Thread Die Right Hand HSS Taper : Amazon.ca: Tools & Home Improvement
7/16-16 Tap And Die Set, UN Machine Thread Tap And UN Round Thread Die Right Hand HSS Taper : Amazon.ca: Tools & Home Improvementwww.amazon.ca
I've never seen a 7/16 X 16tpi before. I also see the nut has an integral washer. Cool....................Daniel
According to my Starrett thread guage it is 16 tpi..........................Chawbeef
7/16 should be either 14 tpi or 20 for NF I believe..................Chawbeef
I’d be happy o make you a couple if you could wait until Thursday evening
Thankyou Martin, that is a nice offer. I am in no hurry as I am really not sure how this tool is used.... Also......can I afford your services??...................LOL DanielI’d be happy o make you a couple if you could wait until Thursday evening
Thanks, Martin is quite near to Niagara..........................Daniel
Daniel, the only charge I have for services is you having to listen to me talk about machining while you are here. I just made some similar nuts and the machine is still set up.Thankyou Martin, that is a nice offer. I am in no hurry as I am really not sure how this tool is used.... Also......can I afford your services??...................LOL Daniel