manualmachinist
Member
I am a retired manual machinist. I started my shop in the early 1980s. The following items are available, as well as smaller hand tools and instruments, and many lathe chucks and lathe accessories (and larger 3 phase machines not suitable for home hobbyists).
All machines are under power.
All machines FOB my shop in west Greater Toronto Area.
I am elderly and not good at all with email but I do try to check my email once per day M-F. (I received help to post this ad.). If interested can you privately contact me through this website? If yes, I will reply and give you my telephone number for faster correspondence, and if you wish I will also try to email you more photos of the machines.
Photos at the bottom of this email follow the same order as the ads.
Thank you for your understanding.
SOLD: One CLARKSON model Mark 1 tool and cutter grinder
-made in England
-single phase 110 volts
-I had 3 manual tool and cutter grinders in my shop to quickly sharpen slitting saws and end mills for a multi-spindle 2-axis CNC mill I made: I used the Mark 1 for sharpening the end teeth on end mills.
-$400 plus HST
SOLD: One CLARKSON model Mark 2 tool and cutter grinder
-made in England
-three phase 550 volts
-I had 3 manual tool and cutter grinders in my shop to quickly sharpen slitting saws and end mills for a multi-spindle 2-axis CNC mill I made: I used the Mark 2 for sharpening the slitting saws.
-$700 plus HST
SOLD: One CHEVALIER model FCG-610 tool and cutter grinder
-made in Taiwan
-single phase 110 volts
-first owner
-very low hours
-air bearing for 5C collets
-includes original manual and unused diamond grinding wheel
-beautiful machine
-I had 3 manual tool and cutter grinders in my shop to quickly sharpen slitting saws and end mills for a multi-spindle 2-axis CNC mill I made: I used the Chevalier for carefully sharpening the peripheral teeth of the end mills.
-$1500 plus HST
FS: One ARBOGA model EM825 mini mill
-some people refer to these machines as “mill-drills”
-3 phase 550 volts
-was made in Germany, now being made in Scandinavia
-geared head
-very solid, rugged machine
-very smooth X and Y travel for its age
-no knee but you can raise and lower the head (and swivel it left and right)
-morse taper #3 spindle
-I used this machine for basic drilling and tapping when my milling machine was occupied with bigger projects
-includes vise and ROHM 3-jaw morse taper #3 keyed chuck
-$750 plus HST
THE END
All machines are under power.
All machines FOB my shop in west Greater Toronto Area.
I am elderly and not good at all with email but I do try to check my email once per day M-F. (I received help to post this ad.). If interested can you privately contact me through this website? If yes, I will reply and give you my telephone number for faster correspondence, and if you wish I will also try to email you more photos of the machines.
Photos at the bottom of this email follow the same order as the ads.
Thank you for your understanding.
SOLD: One CLARKSON model Mark 1 tool and cutter grinder
-made in England
-single phase 110 volts
-I had 3 manual tool and cutter grinders in my shop to quickly sharpen slitting saws and end mills for a multi-spindle 2-axis CNC mill I made: I used the Mark 1 for sharpening the end teeth on end mills.
-$400 plus HST
SOLD: One CLARKSON model Mark 2 tool and cutter grinder
-made in England
-three phase 550 volts
-I had 3 manual tool and cutter grinders in my shop to quickly sharpen slitting saws and end mills for a multi-spindle 2-axis CNC mill I made: I used the Mark 2 for sharpening the slitting saws.
-$700 plus HST
SOLD: One CHEVALIER model FCG-610 tool and cutter grinder
-made in Taiwan
-single phase 110 volts
-first owner
-very low hours
-air bearing for 5C collets
-includes original manual and unused diamond grinding wheel
-beautiful machine
-I had 3 manual tool and cutter grinders in my shop to quickly sharpen slitting saws and end mills for a multi-spindle 2-axis CNC mill I made: I used the Chevalier for carefully sharpening the peripheral teeth of the end mills.
-$1500 plus HST
FS: One ARBOGA model EM825 mini mill
-some people refer to these machines as “mill-drills”
-3 phase 550 volts
-was made in Germany, now being made in Scandinavia
-geared head
-very solid, rugged machine
-very smooth X and Y travel for its age
-no knee but you can raise and lower the head (and swivel it left and right)
-morse taper #3 spindle
-I used this machine for basic drilling and tapping when my milling machine was occupied with bigger projects
-includes vise and ROHM 3-jaw morse taper #3 keyed chuck
-$750 plus HST
THE END
Attachments
-
6D8BE9D9-7335-4B9F-94E4-15BFF383F50C.jpeg311 KB · Views: 88
-
CA6ACA64-5E6F-4546-91C2-C1BAF96BA1FD.jpeg482.1 KB · Views: 78
-
0EEAF5D6-6531-4AB8-B876-ECF877D7C105.jpeg300.3 KB · Views: 71
-
0BACDF9C-58E5-4BAC-86D2-B41103C1C29B.jpeg388.1 KB · Views: 70
-
B0508C75-3C11-42EF-AD23-94B22315FF4D.jpeg358.7 KB · Views: 71
-
C7D7D0E7-A589-43BC-89CB-9B02CC179DFC.jpeg352.7 KB · Views: 73
-
CF1FC943-AB34-491E-9B4A-A8170CD7E6A0.jpeg349 KB · Views: 70
-
534BCF76-1117-4D27-AF7A-9396EA609539.jpeg434.1 KB · Views: 69
-
F6C76851-D8A1-40AE-AC0A-C948E7A9A244.jpeg264.4 KB · Views: 80
-
83FBBF7F-696A-4D50-9DD7-E36016A90FC6.jpeg465.7 KB · Views: 77
-
FFB607C4-B243-4345-AEE1-0264228B87E2.jpeg388.3 KB · Views: 74
-
3B3A8EEE-BE5B-4DAF-9889-3E5AAE4A0BDE.jpeg419.7 KB · Views: 69
-
B4F96A1B-BA05-455C-BD47-B5A32849982F.jpeg521.4 KB · Views: 83
Last edited: