You put an "@" symbol in front of their username. As in @garageguy.
Doing so will also send them an alert.
Tool ER40 collet nut
- Thread starter garageguy
- Start date
Tool
Doing so will also send them an alert.
@garageguy . I have an er32 set. You can insert them behind the retainer ring without tipping and then snapping, but it is very difficult. Similarly removing them requires a great deal of force if you don't tip them. The tipping is by design so they don't come apart by accident and so they can be pulled out of the taper.
Can you post a photo of your modifications so we can look at what you did and either give you some faith or encouragement to go get a new collet nut and or holder.
Can you post a photo of your modifications so we can look at what you did and either give you some faith or encouragement to go get a new collet nut and or holder.
Last fall or maybe this winter I was finding that some of the metric end mills all had 6mm shanks but were of course different sizes. So I ordered a set of 3 ER-20 6mm collets through aliexpress. The interesting thing the order included a nut.
So I'd suggest looking around to see if buying a few collets of the same size will result in a collet nut too.
So I'd suggest looking around to see if buying a few collets of the same size will result in a collet nut too.
Last edited:
Former Member
Guest
Yes, when I bought my first set the company showed me, saved me your frustration. Second thing is that retaining lip also pulls it free to release it.
gerritv
Gerrit
For an example: https://www.aliexpress.com/item/1005002531529886.html , you are looking for a ER40UM which is M50x1.5mm pitch. Easy enough to measure on your arbour.
Gerrit
Gerrit
VicHobbyGuy
Ultra Member
Hex and square collet blocks are handy for work holding, and they come with nuts, so that's another possibility...
https://www.aliexpress.com/item/1005004496585444.html?
Thanks for that post and link. Now I understand the difference between the A and the UM.
@Susquatch , yes I can post a pic of my foolishness. haha All I really did was put the nut in the lathe and cut out the flange. It's over at my shop so can't do it till tomorrow. I did not know about the different wrench styles either. (not surprising huh). Good info here
This is a fantastic idea! A GREAT WAY to get another nut.
Just thinking.... It would be a great "friend" for the other one "with benefits"......
@VicHobbyGuy yep, good idea.