• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Any idea what this type of mount is called?

140mower

140mower

Don
terry_g said:
I have been working on trucks for 43 years and I have never seen a bushing like that.
The voids in the rubber are probably there to make for a softer ride.
International uses a bushing with voids in the front cab mounts on the smaller trucks but its a lot bigger
and presses into a casting.
Click to expand...
Yes, the voids are for a little bit of cushioning, and just below them are little shock absorbers......
 
H

historicalarms

Ultra Member
Also a similar set-up was used in seat base construction for Cat heavy equipment before the gas compression ones were designed, they used an enclosed trapped rubber block with a torsion bar that torqued the rubber around a shaft...hard riding things but they took the sudden stop shock out of our backs.
 
T

trevj

Ultra Member
historicalarms said:
Also a similar set-up was used in seat base construction for Cat heavy equipment before the gas compression ones were designed, they used an enclosed trapped rubber block with a torsion bar that torqued the rubber around a shaft...hard riding things but they took the sudden stop shock out of our backs.
Click to expand...
You can still get torsion style suspensions for trailer wheels, no doubt built the same way.
 
You must log in or register to reply here.
Top