• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

New profile posts

What's new Featured content New posts New profile posts Latest activity
LenVW
KING Canada - Replacement parts and service contact.

GRANT PRETORIUS
TECHNICIEN / TECHNICIAN

700 MELOCHE
DORVAL QUEBEC ( Montreal )
H9P 2Y4
TEL : 514-636-5464 EXT 310
1-877-636-4214
FAX : 514-556-3057

[email protected]

* For inquiries use the E-mail above *

Grant Pretorius has been very helpful for me recently.
Blue Wall
Blue Wall
Thanks for the information
Elias
Elias
Does anyone out there know how to get a hold of a back gear for an Atlas 618?
T
leadscrews for PDM30 mill - took measurements tip-to-tip of leadscrew (not just threaded area):
x - 35 3/8 RH thread;
y - 17 3/4 LH thread

...very close but there are a number of versions out there...

OD is .925, 10TPI - that OD is what I'm focusing on re: minor differences between brands

Where are you located? ON plate I see on your sled ;) I'm in Calgary....
T
re: PDM-30 nut stripped; I bought a PDM30 from a fellow and indeed the nut AND the leadscrew are worn to the point of excessive play. Mind me asking where you bought your parts from? KMS sells the machine but gave me the 'after warranty period, its not our problem' speech and I've tried a few King Canada depots but the prices are crazy....$138 + shipping for the nut and another $342 for the lead screw...
View previous comments…
T
ttlrfrank
I didnt blame KMS for the quality/wear issue...I do take exception to their 'we wont help' in Calgary and have experienced on other items.
FWIW - KMS has a repairs/parts department in Conquitlam - they ask the other stores to direct customer requests to them...but they admitted that Calgary store seems to not be aware/refrains from mentioning that is an option.
Brian H
Brian H
I bought the nut from King, and yes, it was $140 ish bucks. The lead screw they sent me under warranty
Brian H
Brian H
@Susquatch you are 100% correct on the ease of keeping that oiled properly (or lack there of). I have been trying to come up with a way to make/ install a tube somewhere so it will oil directly on either side of the leadscrew nut. Copper tubing and some ingenuity with the mounting...years of fixing old farm machinery might pay off yet...LOL
a smile
I hope you get your wish! May we know what kind of factory you are bidding for? Machining business?
Z
On my profile. What can I say, I am most likely the oldest one in this group. Seen a lot of things, good and bad. Also built a lot of things with my hands. Actually Sport Aviation is my hobby. Been to KOSH 42 consecutive years. Of those 15 times with my own handiwork. Have 2 Lindy's from there. 25 years worked in Air Canada's engine shop (Power Plant, Dorval)
  • Like
Reactions: FatherWes
View previous comments…
Susquatch
Susquatch
94 eh! Well that might well be the oldest! Gives me a new bar to aim for!

My dad was still driving at 94 too. Made the 9 hour drive to Manitoulin at least twice a year. He is gone now.

But driving is a lot easier than making stuff. Are you still machining too?
Z
Ziggy
Yes, I do make things when the need arises. Not as often as when I was making "Homebuilt Airplanes".
Transport Canada was on my back to give up flying for my pleasure.
I do have an Atlas 6 in. lathe with a milling attachment to play with. Also an Atlas Shaper in good condition but I don't have much use for that, perhaps should sell it. The lathe is a keeper for now.
Susquatch
Susquatch
Awesome! You are my newest hero!

I live south of Chatham in SW Ontario. Look me up if you are ever out this way.
Z
Welcome fellow aviator, it looks to me (if that is your picture) you are standing next to an RV 4 or is it a 6 ?.,
Z
Hi!
I am trying to find my way around all the postings etc. It will take a while for an old man, that does not have even a Cell Phone
Ziggy.
  • Like
Reactions: Susquatch
View previous comments…
a smile
a smile
in my country, the vast majority of people actually have no hobbies, in fact, there is no pursuit of life may be exhausted all the strength. I don't care about retirement, I want to live in the present, the present life is my focus, of course,
a smile
a smile
, I will plan my future, but the "now" is the most important thing for me. You two old kids have made me realize how far away retirement is, that maybe the death of life is the time to retire.
a smile
a smile
Oh oh, it turns out that the chat can't exceed 420 characters, and then the two statements need to be 14 seconds apart.
Arbutus
Boring, boring, boring. 8 holes 25.400 dia x 50.000 deep in CRS.....
Janger
Janger
Pictures? What is the part for?
S
Hi, I'm setting up a small Anodizing line for some custom Aluminum finishing services. I'm on Vancouver Island but still looking for a shop for it, but I have a dozen colors and Alodine aka Chem-film also. All of my services are REACH & RoHs compliant just like the EU rules no heavy metals or Cancer causing materials.
jcdammeyer
jcdammeyer
Interesting. Keep us informed.
Tomc938
Tomc938
I’m on the Island too. Where will you be setting up shop?
Don Sipes
Hi! Jeff. Don Sipes in Airdrie. Last winter I made a post here about wanting to bore and hone 2 stroke cylinders. It's still something I would like to do, but for now I'm going to have someone do it for me. If your set up to do 2 stroke stuff I'll get you to do them? THANKS
View previous comments…
Don Sipes
Don Sipes
I'm not sure about pistons. I see import cast pistons available but only for standard sizes, Wiseco don't list them in their current catalogue. It could be challenge! I wouldn't suggest you tool up for just one set of cylinders unless you plan to take in other work. . Jim Titmus has the tooling and did my Kawasaki 2 stroke triple. so that's an option. What's your thoughts?
Gearhead88
Gearhead88
Yes , I know who Jim is . It might be better to get him to do them . If I get more requests for this I'll buy the tooling
Don Sipes
Don Sipes
OK. I wasn't sure of your set up. Just thought I'd keep it in the Hobby Metal workers family if possible. THANKS
johnnielsen
Here is an article about it. The long arm fastened to the bed works the same way as an adjustable stop on a drill press. It has free movement of the tool till it hits the end stop.

Attachments

jcdammeyer
jcdammeyer
Ah. In the front page photo posted it's cutting an external thread. I was trying to figure out how something angled that way would stop cutting internally.
Very complex mechanically.
Thanks for passing that on.
eotrfish
The Bison chuck is still available. I'll check the shipping charge to Washington but I suspect that it will be high.

Brent
M
Model Citizen
I just saw your message today, sorry about the mixup.
I’m still interested in the 5” Bison chuck If you still have it.
did you check on shipping to Washington state.
I am in Kelso Wa, 98626. Email, [email protected]
Thanks, Steve
eotrfish
eotrfish
Same here - still not getting notifications from the board :(

I did post to the chuck for sale thread a while back that the estimated shipping charge is $85

Brent
Back
Top