• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

WTB: Hypertherm Plasma Cutter - Powermax 45/45xp or 65

molyknow

molyknow

Alex
Premium Member
Hi All,

Title says it all, I am looking to buy a Hypertherm Plasma Cutter. Minimum a Powermax 45 but let me know what you have. Ideally with it will have the CPC port installed, however that is not a deal breaker. Located in Calgary and open to anything in Western Canada.
If you have anything, reply to the thread or send me a private message.

Best,

Alex
 
you might have better luck looking for a powermax 800, 1000, or 1100, they were made up until around 2010/2012 ish, 50, 60 and 80amp respectively
 
These are 30's so likely too small

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com www.facebook.com

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com www.facebook.com
 
Mine is not for sale - just making a comment. I bought a XP 45 from Airliquide a couple of years ago. I love it. It is a joy to use.
Good luck with your search.
 
If I see anything in my neck of the woods...I'll post it for you.
Are you dead set on Hypertherm?
I have seen other machines (besides the Jungle Store specials) like Everlast, Miller etc from time to time.
 
You will be happy with Hypertherm.
I have the Powermax 1200, and on my table I use an upgraded Duramax machine torch. I've been using it since 2006, and it just keeps on going trouble free.
 
Yes, it has torch height control. There is a port on the 1200 that a DIN plug wires into and this controls the firing of the torch.
The trigger circuit is different for the machine torch. If you were using a hand torch, You can unhook the small black and white wires from the purple trigger wire that was cut and put the purple wire back together. The small black and white wires need to be connected to the CPC plug at the back of the machine (or the wires going to the plug) on pins 3 and 4. It doesn't matter which goes on which as this is just a dry contact for the trigger.
I can get more pictures and stuff if you are interested.
 
You must log in or register to reply here.
Back
Top