Which lathe models that have D1-3 camlock spindles?

[Johnwa]

@TorontoBuilder This is an old thread but I believe Grizzly’s short lived South Bend Heavy 10 model SB1007 used D1-3.
They do carry parts and part PSB1007031 may be the correct cam.

​

 

[Dabbler]

I got some spare D1-6 cams for my backplate from Shars, as a part - you have to phone them and talk to the parts guy - but they were 8 US$ each. Make sure you order inch/metric threads correctly. That one tripped me up. I managed to trade mine with a guy that needed mine, and I needed his. So the story had a happy ending.

 

[TorontoBuilder]

@TorontoBuilder This is an old thread but I believe Grizzly’s short lived South Bend Heavy 10 model SB1007 used D1-3.
They do carry parts and part PSB1007031 may be the correct cam.

​

Johnwa, thank you very much for the info and link.

I had looked at Grizzly before and discounted them because the SB Heavy 10 is a D1-4 machine not D1-3.

However, while I was able to source the camlocks overseas for an arm and a leg, I was not able to obtain the retaining pin assemblies comprised of the lock screws, lock pins and springs. I believe these are the same for both the D1-3 and D1-4 spindles and grizzly has them in stock at reasonable prices so I wont have to try to make these parts now. Thanks for the help I really appreciate it.

 

[Johnwa]

Johnwa, thank you very much for the info and link.

I had looked at Grizzly before and discounted them because the SB Heavy 10 is a D1-4 machine not D1-3.

However, while I was able to source the camlocks overseas for an arm and a leg, I was not able to obtain the retaining pin assemblies comprised of the lock screws, lock pins and springs. I believe these are the same for both the D1-3 and D1-4 spindles and grizzly has them in stock at reasonable prices so I wont have to try to make these parts now. Thanks for the help I really appreciate it.

Grizzly sells D1-3 backplates so I’ve asked them which lathe they fit. No response so far.

 

[Johnwa]

@TorontoBuilder you’re right. It was their 10k model SB1002 that used the D1-3. They carry the cam https://www.grizzly.com/parts/grizzly-camlock/psb10020006 I don’t know why I didn’t find this when you first posted.

 

[TorontoBuilder]

@TorontoBuilder you’re right. It was their 10k model SB1002 that used the D1-3. They carry the cam https://www.grizzly.com/parts/grizzly-camlock/psb10020006 I don’t know why I didn’t find this when you first posted.

thanks again, I've ordered the correct parts now.

 

[Dabbler]

@TorontoBuilder you’re right. It was their 10k model SB1002 that used the D1-3. They carry the cam https://www.grizzly.com/parts/grizzly-camlock/psb10020006 I don’t know why I didn’t find this when you first posted.

Now THATs about the right price!

 

[TorontoBuilder]

Now THATs about the right price!

IIIRC I ended up paying $21.51 a piece = 64.53 PLUS an "Admin/Postage" fee of $45 for total of $109 and then GST upon arrival in Canada.

I got hosed on the deal and didn't get my small parts to boot. par for the course with british lathes.

The only thing worse is ordering camera gear from Japan. via ebay