-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Shop What's Happening in Chazz's Shop?
- Thread starter ChazzC
- Start date
Shop
dodgedifferent2
Member
Oh geeze. I thought I was paging myself. Everyone in my "hood" calls me Chazz.
Welcome from one Chazz to another ;-)
Welcome from one Chazz to another ;-)
ChazzC
Ultra Member
Just my immediate family (and on the Forums).
ChazzC
Ultra Member
Mounting a new 5" 3-Jaw Accusize Chuck on my 7x16 Mini-Lathe
Purchased the chuck back in December after being alerted to a deal by a member on another Forum, then waited for Little Machine Shop to bring the backplate to Cabin Fever and then had to get things set up for videos. The other Forums had to wait for parts 2 & 3; I've now created as a playlist:
https://www.youtube.com/playlist?list=PLVajyBolhaD0rVdi0jxsCEzVE8K85lN3R
Please like and leave comments; or you can leave comments/questions here (tried to embed the video here, but ran into difficulties, I think because it's a playlist: sorry). Thanks!
Purchased the chuck back in December after being alerted to a deal by a member on another Forum, then waited for Little Machine Shop to bring the backplate to Cabin Fever and then had to get things set up for videos. The other Forums had to wait for parts 2 & 3; I've now created as a playlist:
https://www.youtube.com/playlist?list=PLVajyBolhaD0rVdi0jxsCEzVE8K85lN3R
Please like and leave comments; or you can leave comments/questions here (tried to embed the video here, but ran into difficulties, I think because it's a playlist: sorry). Thanks!
Last edited:
ChazzC
Ultra Member
ChazzC
Ultra Member
Glammed Up my Kant-Twist Clamps
Got tired of sore fingers from the skinny T-handles so finally I broke down and added grips:
4-1/2", 2-1/2", 2" & 1" clamps (some are Kant-Tiwst-ish); mostly Weaver-Grip™ courtesy of a Zoro 20% coupon, but a fewcopies improved versions from eBay (the Weaver's went on easier, even on the non-branded clamps). The baby 3/4" has a knurled knob. Still need another grip for a lonely 1" (Zoro had limited stock for the small ones).
I do have a problem: I found a bare spot that is begging for more clamps.
Got tired of sore fingers from the skinny T-handles so finally I broke down and added grips:
4-1/2", 2-1/2", 2" & 1" clamps (some are Kant-Tiwst-ish); mostly Weaver-Grip™ courtesy of a Zoro 20% coupon, but a few
I do have a problem: I found a bare spot that is begging for more clamps.
I need to spend some quality time making labels!
I just use wide masking tape and a felt tip marker.
ChazzC
Ultra Member
In High School I was very good at drafting, but lost points for lettering.
My dad, a draftsman used to have handwriting like a typewriter. I was an abject disappointment in that regard.