• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Welcome to Westwood Metalworks, What is he building in there?

....... a clean shop is the sign of a sick mind, your in good company here. 😉
I LOVE having a clean and organized shop. But it's something that exists only for a brief period of time when I finish a bunch of projects hanging around, and start putting stuff away, or making homes for things that don't have one. Once that is done, new projects begin, and all hell breaks loose again.

There are too many projects on the go right now, and I have been too busy with work all summer to make any headway into them. Not to mention bringing home a lot of scrap and offcuts that pile up.......I either need to stop bringing stuff home, or I need to build another stock rack for it. I'm back to bucket storage because it's easy, and easy to move around, and I HATE that......

I really just need a bigger shop.....That would solve ALL my problems.
 
I look at my goal of having a clean shop in the same way I look at my finances........
I am happily working on my second million......... after completely giving up on the fiasco of the first one. 😉
 
A friend up the road just dropped this off asking if I could fix it......worst spot it could break. I told him id take a crack at it, but there are no guarantees, and to bank on buying another anyway, but this might get him through the winter plowing snow.....
20261120_133932.jpg
20261120_133935.jpg
20261120_134503.jpg
20261120_134811.jpg


Tacked for alignment, will groove out one side at a time for a full pen weld. Pre/post heat of course. I am reasonably sure They are cast steel, not iron, verified via spark test.

If these had been red, they wouldn't have broke......

Ill update when done
 
Any chance of adding a reinforcing plate on either side or would the additional thickness be an issue?
 
Vee'd out the crack to just below center and tacked on some run off tabs. Preheated it with the tiger torch.
20261120_143307.jpg
20261120_144047.jpg
20261120_145448.jpg

Not bad, coulda been better....Flipped it over, cut those tabs off, and snapped my backing rod off.

20261120_145804.jpg

Vee'd that side out again, past center. Then preheated it and repeated the process....
20261120_150439.jpg
20261120_150756.jpg
20261120_151039.jpg
20261120_152442.jpg

Put the torch on it again, then wrapped in in a blanket to cool down.
20261120_152732.jpg

I'll try and find that hole again after dinner. Gonna be covered in burr chips for a while......

We'll see how this pans out. I'm about 70% confident it'll be fine. I gave it a fighting chance, but it's a terrible spot for a repair.....

I haven't got the story on how he broke it yet. 30hp JD scut. Gotta be a good story......
 

Attachments

  • 20261120_143003.jpg
    20261120_143003.jpg
    2.4 MB · Views: 0
  • 20261120_142506.jpg
    20261120_142506.jpg
    1.5 MB · Views: 0
Back
Top