• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Tool Vevor Drill Bit Sharpener Improved

Tool
It makes me realize that 3D printing the collet nut might be more useful than even the collets. Easy way to control the length of the grind.

Brain fart. Woke up realizing that a custom 3D Printed Holder won't work. It's the gauge depth during setup (for more grind) or during use (for less grind) that has to change, not the holder. A longer or shorter holder won't change the drill grind. It indexes to the gauge set points regardless.
 
Brain fart. Woke up realizing that a custom 3D Printed Holder won't work. It's the gauge depth during setup (for more grind) or during use (for less grind) that has to change, not the holder. A longer or shorter holder won't change the drill grind. It indexes to the gauge set points regardless.
print collet holders with different depths
 
print collet holders with different depths

That was my initial thinking. Then I realized that the gauge and grind stations will simply take that into account and change nothing. The change has to take place between setting and using. Either set long and use normal, or set normal and use long. Both require a shim or some similar adjustment.
 
Why do some drill bits just have a round shank and not the three flats? Even a new/sharp drill just catches and spins in the chuck, without the the three flats

Before I waste money on a sharpener, just toss the round shank bits? Is that a sign of a cheap drill bit?
 
Back
Top