• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Two standard Modern Lathes - $1300 - Lindsay, On

The Racer/Leblond connection for the Utilathes is pretty much a dead end. If you have the part and it is worn or broken it would be either a DIY or take it to a machine shop and they can see about making one. If Racer/Leblond has the measured drawings it would be sweet to have those made public!

@Darren is doing the job, as I did, by getting the gear cutters and going from there.
 
The Racer/Leblond connection for the Utilathes is pretty much a dead end. If you have the part and it is worn or broken it would be either a DIY or take it to a machine shop and they can see about making one. If Racer/Leblond has the measured drawings it would be sweet to have those made public!

@Darren is doing the job, as I did, by getting the gear cutters and going from there.
I sent them an email requesting very nicely that they make the drawings public to no reply.
 
Back
Top