• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Calgary Area Meetup is set for Saturday July 12th at 10am. The signup thread is here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Tool Test probes (the mechanical type)

Tool
slow-poke

slow-poke

Ultra Member
To clarify when I say mechanical I mean a test probe for measuring an edge as opposed to say a Volt.

My previously posted question about coaxial indicators and some of the responses makes me think a test probe might be a more useful tool.

A quick google search resulted in threads ranging from the merits of a $9700 probe to the cheapest $100 AliExpress probe.

Well forget about the $9700 probes, if I purchase a test probe it's going to be a lot closer to the Ali end of the spectrum.

Question 1) Anyone using one of the $100 Ali type probes and if so how good/bad/ consistent are they?

Question 2) Purchase a new Ali type probe or a used better branded eBay special?

Question 3) How much should I expect to pay for a probe that will results to under 0.001" error?
 
Not a DTI, something more like this, better title "3D probe"?
18DCE4F2-F439-457B-BEB4-47952EBE73F8.jpeg
 
Susquatch said:
How about an electronic edge finder instead.....

Accusize Industrial Tools Electronic Short Shank Edge Finders with Sound Alert, C028-9273 : Amazon.ca: Industrial & Scientific

Accusize Industrial Tools Electronic Short Shank Edge Finders with Sound Alert, C028-9273 : Amazon.ca: Industrial & Scientific
a.co

They claim 2 tenths. I routinely get 1 tenth. But I'm sure other errors (spindle, holder, etc) stack up on it.
Click to expand...
Looks great.

What happens if you inadvertently bump too far?

Say you're 1 mil away, and you goof up and jog 10mils, does the tip break or is there some built in compliance for operator error?
 
slow-poke said:
Looks great.

What happens if you inadvertently bump too far?

Say you're 1 mil away, and you goof up and jog 10mils, does the tip break or is there some built in compliance for operator error?
Click to expand...

No problem. The ball has a spring loaded attachment to the stem. Works great.

What is a mil? Or did you mean mill? (jk)
 
Susquatch said:
No problem. The ball has a spring loaded attachment to the stem. Works great.

What is a mil? Or did you mean mill? (jk)
Click to expand...
Commonly used term when laying out PCBs or referring to component size, I assumed (I guess incorrectly) that "mil" was also used when referring to small dimensions in the machine world.

4 mil track width, 4 mil spacing is for dense circuits.

EE05F931-8322-4899-85F6-7907DFF5F4FA.jpeg
 
slow-poke said:
Commonly used term when laying out PCBs or referring to component size
Click to expand...

I'm truly sorry to make you explain all that. I had hoped the "jk" would tip you off. But ya, not many use the term in machining. A thou is much more common. Dentists seem to like it though......

What really tics me off is when it gets used instead of mm.
 
Susquatch said:
How about an electronic edge finder instead.....

Accusize Industrial Tools Electronic Short Shank Edge Finders with Sound Alert, C028-9273 : Amazon.ca: Industrial & Scientific

Accusize Industrial Tools Electronic Short Shank Edge Finders with Sound Alert, C028-9273 : Amazon.ca: Industrial & Scientific
a.co

They claim 2 tenths. I routinely get 1 tenth. But I'm sure other errors (spindle, holder, etc) stack up on it.
Click to expand...

Thanks for pointing that style out.

I just ordered the $18 delivered AliExpress version. Will report when it arrives.

Back to the power required for (another) bird-bath in the garden task, thanks to SHMBO;-)
 
slow-poke said:
Not a DTI, something more like this, better title "3D probe"?
View attachment 67110
Click to expand...
I have that exact one - "V6" and it seems to be very repeatable to within tenths. Pretty amazing for what was ~$70 shipped. The only thing I'd wished to have done different was to be sure to get the right kind (PNP or NPN) for the systems inputs.
Along with the probing routines in PathPilot its very easy to use (PP only uses the probe in one plane at a time so I set up the Z depth and ;et it move around X-Y. Much better for me than the LinuxCNC Probebasic that I always managed to crash using it with non-intuitive plunge depths and speeds, etc.
That electronic one works ok, have a similar battery powered one, but it needs an electrically conductive material to close the loop between the tip and the spindle. So won't work on plastics, wood etc.

FYI - I'm more than happy to have a cheap 3D probe, because when I do eventually crash it I'm out only $70 and not thousands that a professional version costs, even if they are rebuildable. Also looks like Amazon is now carrying them for $68 https://www.amazon.ca/dp/B0B46Y6GG7
 
You must log in or register to reply here.
Back
Top