• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

SM 9" Ultilathe Crossslide nut and screw

This thread peaked my curiosity, so I ventured on another backlash reduction x-slide nut creation.....

SplitNut2.JPG


With this nut I can tweak backlash down to 1/2 thou from 1-1/2 thou (original nut), however it's tight at the extreme ends of the lead screw which is to be expected of a worn screw I guess. Is backlash really worth chasing if you know about it and compensate?
 
YYCHM said:
This thread peaked my curiosity, so I ventured on another backlash reduction x-slide nut creation.....

View attachment 22772

With this nut I can tweak backlash down to 1/2 thou from 1-1/2 thou (original nut), however it's tight at the extreme ends of the lead screw which is to be expected of a worn screw I guess. Is backlash really worth chasing if you know about it and compensate?
Click to expand...
Its worth chasing on a mill, but backlash on a lathe really isn't important as long as you are aware of it.
 
Some people feel that excess backlash can adversely affect parting (chatter, poorer cutting performance). As to why this would be I cant really say. One would think once the lash is taken out as you in-feed, screw threads are fully contacting against nut thread, it should be the same right? But maybe the devil is in the details as you are hand feeding at non-perfect handwheel rpm, that micro-momentary pause + some slop could maybe initiate chatter & then it worsens on on its own. I dunno. Parting is one of hose things where pick one of 7 possible issues can cause problems. But I've heard people say when they replaced their worn feedscrew or tightened the ABL nut the problems went away or diminished. Now did they also reset their gibs while doing this job & that contributed to cutting improvement? Hard to know.

Now that my ABL nut is tighter I feel like the infeed control is crisper & maybe overall finish has improved all things equal. Maybe its just allowing the table lock to hold better. But it comes at the expense of feedscrew & nut wear. I have a spare so not too worried. I'll post some pics of my feedcsrew assembly but its nothing special. What you made on your own is an improvement over what is standard on my lathe.
 
YYCHM said:
With this nut I can tweak backlash down to 1/2 thou from 1-1/2 thou (original nut), however it's tight at the extreme ends of the lead screw which is to be expected of a worn screw I guess. Is backlash really worth chasing if you know about it and compensate?
Click to expand...

I just read this again. Do you mean just pushing & pulling on the table you only displace 0.0005" to 0.0015" (or dead band in the dial = same thing). That's nothing. Maybe even considered too tight & premature wear? I always assumed 0.010" was a normal starting point & wear compromise. What do others set theirs at?
 
PeterT said:
I just read this again. Do you mean just pushing & pulling on the table you only displace 0.0005" to 0.0015" (or dead band in the dial = same thing). That's nothing. Maybe even considered too tight & premature wear? I always assumed 0.010" was a normal starting point & wear compromise. What do others set theirs at?
Click to expand...

I messed up using the thou term again. Initial dead band dial backlash was 0.015", final backlash is 0.005". So 5 thou v.s. 15 thou?
 
You must log in or register to reply here.
Back
Top