• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • The 2026 Calgary Area Meetup is set for Saturday May 30th at 10am. The signup thread is here! Robinhood has graciously offered to host the meetup again this year. Please note that you MUST RSVP to the notice linked above if you wish to come.

Shahe pocket inclinometer

PeterT

Ultra Member
Premium Member
These digital inclinometers have been around for a while. Usually they are substantially bigger & heavier. I think Ive tossed out 2 now over the years that went on the fritz.
I've had pretty good luck with the SHAHE brand in other instruments. I needed an ideally smaller/lighter one so gave this one a try. So far so good. The display is bright & crisp. It seems to repeat very well. The older ones had a calibration ritual where you flip flopped & ress various buttons, which is fine. This one come pre-levelled out of the box. But it also has a null which is more what I do often (stick it on a reference, null to zero, then incline to som etarget angle based on that). The magnet is decent, but I'd say its half the weight of the old ones. My only gripe is the threaded inserts they chose for the back are some bizarro size. I've got lots of metric & imperial in that size but nothing quite fits. Almost like its a #5-40 or something. I'll figure it out on eday but too bad, because it wouldbe amenable to custom fixtures or whatever.
 

Attachments

  • 09-19-2026-005.jpg
    09-19-2026-005.jpg
    44.9 KB · Views: 4
  • shahe pocket inclinometer.jpg
    shahe pocket inclinometer.jpg
    65.2 KB · Views: 4
Yes they are everywhere. Hopefully improving over time? The Fowler I had was a POS. The one you show looks larger, most are. If size isnt an issue more to choose from

1790369415689.png
 
This is what I bought mail order from Busy Bee.

Used it to set the correct home offsets for the robot arm.
 
Back
Top