• Spring 2024 meetup in Calgary - tentative date Saturday, April 20/2024. Other regions are also discussing meet ups. If you want one in your area get going on organizing it! discussion
  • We are having email/registration problems again. Diagnosis is underway. New users sorry if you are having trouble getting registered. We are exploring different options to get registered. Contact the forum via another member or on facebook if you're stuck. Update -> we think it is fixed. Let us know if not.
  • Spring meet up in Ontario, April 6/2024. NEW LOCATION See Post #31 Discussion NEW LOCATION

Looking for some cast iron / phosphor bronze / manganese bronze

Proxule

Ultra Member
Howdy fellas,

Curious if anyone has any cast iron bar or tube, phosphor bronze bar or tube and or manganese bronze bar or tube.

Final OD needs to be 7/16 and ID can be no bigger then .360 - Length is 3.5 inches long x 2 pcs
I will take any shape size or color ( I will turn to suit my dimensions ), Wanted to see if there is anything Edmonton local?

Thanks
 

justin1

Super User
You could try hitting up pick a part or engine shop and grab a camshaft out of a car I think most camshafts the lobes are just induction hardened rest should be fairly workable I would bring a file and check the non ground parts see if it bites. A engine shop probly just let you pull one off a scraped head for free. You'll just have to zip cut off the hard bits but for 3.5" part probly wouldn't take too long to do.
 

Bandit

Well-Known Member
Crankshafts can be a good source of iron also. May not want one that came from engine that threw a rod/ dropped a piston. Some have very large counter weights nearly finnish machined. Keep in mind some are also forged steel units. Can usually tell by seam on crankshaft.
 

phaxtris

(Ryan)
Premium Member
Premium Member
Keep in mind many if not most camshafts are hollow, something to keep an eye on when your scavenging
 

Bandit

Well-Known Member
Some of the 1980s Ford small blocks cranks were hollow in spots too. Not sure what things look like now as I haven't done auto crank grinding since 1985? Air compressor cranks since 1992? Anyway engine parts can be a good source of materials.
 
Top