• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Greetings from Oakville

Manfred

Manfred

Active Member
Premium Member
Refurbishing an EMCO Compact 5 lathe and building a CNC Mill from scratch while fixing up the basement and the deck. Happy to have stumbled on a Canadian Forum.

Hoping to learn a lot and return the favour - as I get better at cutting metal.
 
Manfred said:
Refurbishing an EMCO Compact 5 lathe and building a CNC Mill from scratch while fixing up the basement and the deck. Happy to have stumbled on a Canadian Forum.

Hoping to learn a lot and return the favour - as I get better at cutting metal.
Click to expand...

Welcome from Ontario farmland south of Chatham Manfred!

You will have fun here!
 
trlvn said:
Welcome from...also Oakville!

Where did you get the EMCO? They don't seem to be too common in our neck of the woods.

Craig
Click to expand...

My Emco came all the way from Florida - before shipping became so expensive. The Emco is still stock standard but the mill will be custom with the Z-axis column from an LMS5500 and the table from a M1111. X- and y-axis on 20mm rails. Still trying to figure out the z-axis. Cant decide whether to use the dove tails or rails.

Closed loop steppers running on Linux - but that's still a few pay periods away.
 
You must log in or register to reply here.
Back
Top