Has anyone owned or operated a Force GL - 300 C x 914 lathe? My offer was accepted for one outside of Edmonton. Deposit is being put down now, and just wanted some insight on this import machine.
Force GL - 300 C x 914
- Thread starter Beez12
- Start date
Looks like a Taiwanese gear head machine.
http://www.lathes.co.uk/taiwanese-1330-1340-1430-1440/
Although the numbers work out to a 1236 all the workings should be close.
Congrats, I didn't think it would be up long at that price.
http://www.lathes.co.uk/taiwanese-1330-1340-1430-1440/
Although the numbers work out to a 1236 all the workings should be close.
Congrats, I didn't think it would be up long at that price.
300x914 would be just shy/equivalent to a 12x36
Looks very similar to the lathe we had at the high school where I taught, Force name and everything. It was a pretty typical import 12x36, came from the House of Tools. Worked well enough, but make sure the quick change gear box for threading and power feed is kept lubed, I had that thing apart a few times on the school lathe, cleaning up shafts and bores when the kids wouldn't lube the machine before using it. Shafts are steel running on the castings with oil drip holes holding string wicks. The one at the school also had a plastic idler gear in the gear train from spindle to quick change box, it got replaced a few times too, including the times when the quick change piled up.
If a similar one (for the most part) survived my kids when I was teaching, you should be fine, lol!
If a similar one (for the most part) survived my kids when I was teaching, you should be fine, lol!
JohnW
(John)
I used to own one of those. I still have the manual as a pdf and a bunch of data on the internal gearing if you want it. Just PM me. PeterT linked to my for-sale thread above. I was happy with it. I only sold it to upgrade to a larger machine that I got a good deal on. The old machine made several of the replacement parts that were broken on its replacement.
Hi John, any chance I could get a copy of this pdf? Thanks