OT here , but Chatham is where I made a u-turn leaving Toronto Susquatch ! Wish I had known you needed reamers .
Wish I'd known you were that close! We could have had lunch on me and pretended it was on purpose!
-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Tool Chucking Reamers
- Thread starter Susquatch
- Start date
Tool
Wish I'd known you were that close! We could have had lunch on me and pretended it was on purpose!
As a young lad I watched my grandfather grab spark plugs on his old magneto driven farm equipment to see if they were firing. He'd convulse for a cycle or three, then move onto the next one. Amazing thing to watch. From a safe distance...
It wasn’t that bad really, I stopped doing that when they brought out Electronic
ignition after all they said they improved the spark not to mention Acel‘s SuperCoil.
Now it only happens pulling the plug to stop the lawnmower.
Mind you going back to a earlier time in Automotive Shop it was fun to grab the plug wire and shock the guy grounded next to you as your finger jumps a spark to his neck.
Once at the Science Fair they had a machine with a + and - handgrip to show you how you can’t let go of the + or - due to muscle contraction while your Buddy cranks the dial I only did that once also lol.
Despite the various (interesting) forks in the road on this topic, this is an excellent discussion of an important issue. I especially liked the Blondihacks video - somehow I missed that one. While I cannot say I read every word in every reply, I think it might be worthwhile to mention that, according to what I have read and experienced, drills never bore a completely round hole. Reamers are certainly an excellent solution to the size question when making holes to fit shafts, but it is perhaps equally important to pay attention to the "roundness" issue as well. Even a reamer will never make a perfectly round hole, but they come much closer than a drill bit ever will. I have always thought this is because the reamer has at least triple the number of cutting edges - but there could be other reasons as well.