• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Borrow or rent a small Gantry in calgary?

C

calgaryguy

Chris
The auction bug bit me again and I bid on this:

Regal Auctions Ltd.

regal.nextlot.com regal.nextlot.com

It probably weighs 1000-1300 lbs based on comparative weights for older 12-16" jointers.

Anyone in Calgary have a Gantry I can rent/borrow for a few days? I looked at rental companies and the cost is northward of $150/day for a gantry with hoist. I have a 14' trailer available to move it around fully assembled.
 
Looks like a great deal! Too far away to help, but I have moved heavier machines than that easily with no crane. Older lathes that had those type of legs, I lifted each end with an engine lift and then put a platform dolly under each end. Strapped it down to the platforms and rolled away.
 
mickeyf said:
Older lathes that had those type of legs, I lifted each end with an engine lift and then put a platform dolly under each end. Strapped it down to the platforms and rolled away.
Click to expand...

This is good advice, carts FTW
 
calgaryguy said:
Its getting it on and off the trailer which is 18" higher than my garage floor. Once on the garage floor I can pipe/skate it around.
Click to expand...

i realize that, suggestions were given in your other duplicate thread....

a sheet of 3/4 plywood and a couple 2x6's could make you a quick and dirty ramp.....or hire a picker for an hour
 
Got it off the trailer with an engine hoist. Was sketchy at times. had my lovely wife standing on one back corner of the hoist to counter balance the 'heavy' end of the jointer (twin leg casting and 3 hp Baldor on that end). Into the teardown (there isnt much to these things) and off to source some new bearings for the spindle.
 
Love to hear some more details and see some pictures! What is the cutting width? Square head or more modern? What are the specs on the motor that came with it? What do you plan to use it for?

Craig
 
I'll get some pics up.

Its a Cowan & Co 12" jointer with a round cutterhead. It may have originally been babbit bearings, but there are two large F.A.G. 'Pillow Blocks' there now, with roller bearings in each that seem like a retrofit. Its newer looking than anything in the catalogs on VintageMachinery.org so I'm guessing 1920-1930's vintage?

What am i going to use it for? I threw in a max bid of $400 in the auction for 'sh*ts and giggles' and got it for somewhere around $375+ fees (about 450 all in IIRC). I figured the 3HP Baldor 1ph TEFC motor was prolly worth almost that by itself if nothing else. Now that I have it home I think it'll clean up nicely for resale. Its just too big for my shop, and I already have a Hammer A3-31 combo planer-jointer that is 310mm (12" wide) in alot smaller footprint. New bearings will cost me $280 (130 ea) and prolly another $30-40 in sharpening the blades. I've seen 8" jointers go for $1000, so a 'old iron' wide bed jointer like this one should fetch $1500-ish.
 
Ahh that makes a little more sense.

If your just going to sell it I see 1210k bearings for as cheap as 25$ a piece on the real low end (Ali), or average around 70 a piece (Canada/us)

I get that your obviously looking as some much higher end ones than those...but will the average buyer pay you for the nicer bearings?

unless your doing it more for fun than to make a few bucks and want to make it as nice as possible...then disregard
 
phaxtris said:
Ahh that makes a little more sense.

If your just going to sell it I see 1210k bearings for as cheap as 25$ a piece on the real low end (Ali), or average around 70 a piece (Canada/us)

I get that your obviously looking as some much higher end ones than those...but will the average buyer pay you for the nicer bearings?

unless your doing it more for fun than to make a few bucks and want to make it as nice as possible...then disregard
Click to expand...

SKF 1210K are $130 each. Why skf? Because thats how I roll. I dont buy junk from Ali.
 
calgaryguy said:
SKF 1210K are $130 each. Why skf? Because thats how I roll. I dont buy junk from Ali.
Click to expand...

I wouldn't buy the Ali bearings either, probabaly fail in an hour of use, but for something I was just going to sell, I would definitely throw in some cheaper but adequate nsk's
 
"For something I was going to sell". I guess you and I have different standards. I would never put a set of bearings in something with the knowledge they were garbage quality. Great, I'd make more margin, and quite possibly knowingly screw the next owner. Why? I dont understand this mentality...
 
Last edited by a moderator:
calgaryguy said:
"For something I was going to sell". I guess you and I have different standards. I would never put a set of bearings in something with the knowledge they were garbage quality. Great, I'd make more margin, and quite possibly knowingly fuck the next owner. Why? I dont understand this mentality...
Click to expand...

I don't consider nsk bearings garbage, and I don't think anyone does (other than you obviously), nsk, NTN, skf...all high quality bearings

I said I wouldn't use the Ali bearing either, I was putting other options out there...from the very cheap to the average
 
Last edited by a moderator:
You must log in or register to reply here.
Back
Top