-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Atlas tool post grinder
- Thread starter Frcsc6el8
- Start date
That looks like a heck of a deal, and if I didn't already have a TPG, I'd be on that like white on rice!
FWIW, chuck a sheet of aluminum foil, with a good spritz of aerosol cooking spray onto the lathe bed to protect the ways. Spritz on more if you are working heavy enough to see the grit dry and bouncy!
Clean everything as very well as you can after, anyways. This tip has saved me a LOT of cleaning!
FWIW, chuck a sheet of aluminum foil, with a good spritz of aerosol cooking spray onto the lathe bed to protect the ways. Spritz on more if you are working heavy enough to see the grit dry and bouncy!
Clean everything as very well as you can after, anyways. This tip has saved me a LOT of cleaning!
It mounts in a t-slot on the cross slide
The t-slot nut has 1/2 NF bolt and fits into a 5/8 slot. The wider slot is 1 inch
The diamond dresser clamps between the ways.
The center height of both the TPG and the diamond dresser is adjustable
If you need more info let me know
The t-slot nut has 1/2 NF bolt and fits into a 5/8 slot. The wider slot is 1 inch
The diamond dresser clamps between the ways.
The center height of both the TPG and the diamond dresser is adjustable
If you need more info let me know
Attachments
Anyone with enough imagination, to see a use for a a TPG in the first place, should have no trouble at all making an adapter plate either to mount this direct on a compound slide, or one that would be held in any of many types of tool post holders.
Do the Trig yerselves, but IIRC, if you set the compound 3 degrees off from being parallel to the spindle, each thou of in-feed on the compound moves the cutter (grinding wheel) one tenth of a thou deeper in feed. This can give you REALLY fine control on depths of cut, if and when you need such.
Where abouts on Vancouver Island? Still kinda want... Don't NEED, but kinda want. LOL!
Do the Trig yerselves, but IIRC, if you set the compound 3 degrees off from being parallel to the spindle, each thou of in-feed on the compound moves the cutter (grinding wheel) one tenth of a thou deeper in feed. This can give you REALLY fine control on depths of cut, if and when you need such.
Where abouts on Vancouver Island? Still kinda want... Don't NEED, but kinda want. LOL!
140mower
Don
If you get that itch to use one, you can always pop by and borrow mine..... As long as a South Bend one is okay....
I also have an internal one that I believe came off a brake lathe....
Parksville Qualicum Beach
I already GOTS one, but it is a little different than this one.If you get that itch to use one, you can always pop by and borrow mine..... As long as a South Bend one is okay....
I also have an internal one that I believe came off a brake lathe....
I can see uses for the smaller form factor!
If @Dabbler does not make a deal, I might!
Not received
C
Congratulations Dabbler!
