• Spring 2024 meetup in Calgary - tentative date Saturday, April 20/2024. Other regions are also discussing meet ups. If you want one in your area get going on organizing it! discussion
  • We are having email/registration problems again. Diagnosis is underway. New users sorry if you are having trouble getting registered. We are exploring different options to get registered. Contact the forum via another member or on facebook if you're stuck. Update -> we think it is fixed. Let us know if not.
  • Spring meet up in Ontario, April 6/2024. NEW LOCATION See Post #31 Discussion NEW LOCATION

Acorn CNC with Clearpath Servo's update.

Nice looking build by the way. I likely have about 100 to 140hrs of hard run time on the servos (the functional ones). The next upgrade is ball screws and likely higher resolution servos on 2 axis maybe 3, we'll see.
Here's a more recent pic showing the 4th axis finished and the 1/2" aluminum table, still have to do some wire management in the control box . I had nema 34 steppers on gecko raptor drivers at first and pulled it all for the Clearpath.I made the two heads for fun on the 4th axis for practice,had to customize the post processor in Vetric Aspire .
 

Attachments

  • 68728803286__DC62A93E-F225-4196-900A-B785E10454BE.fullsizerender.jpg
    68728803286__DC62A93E-F225-4196-900A-B785E10454BE.fullsizerender.jpg
    843 KB · Views: 16
  • 68728878054__70E0F356-2014-471C-B014-D80CA4A7ACAC.fullsizerender.jpg
    68728878054__70E0F356-2014-471C-B014-D80CA4A7ACAC.fullsizerender.jpg
    439.8 KB · Views: 16
Top