Y'all like big lathes...Here's one in Victoria BC $500
- Thread starter VicHobbyGuy
- Start date
Former Member
Guest
It will fit no problem, you just need a dumb...I mean helpful member (or 2) to be at the bottom end.
Getting in down will be easier then getting it back out.
140mower
Don
........as I told my kids.... Not my problem.
Chip Maker
Super User
Getting it back out the same way they get cast furnaces out. Sledgehammer!
John Lang & Sons
Johnstone, Scotland, U.K.
Manufacturer Class: Metal Working Machinery
History
Manufactured Metalworking Machinery
![8805-A.jpg]()
Here is a little more info I found on the ‘Vintage Machinery.org’ website.
Jeff Joslin is the historian for that group.
Johnstone, Scotland, U.K.
Manufacturer Class: Metal Working Machinery
History
| Last Modified: Feb 27 2020 11:43PM by Jeff_Joslin If you have information to add to this entry, please contact the Site Historian. |
Here is a little more info I found on the ‘Vintage Machinery.org’ website.
Jeff Joslin is the historian for that group.
Proxule
Ultra Member
John Lang & Sons
Johnstone, Scotland, U.K.
Manufacturer Class: Metal Working Machinery
History
Manufactured Metalworking Machinery
Last Modified: Feb 27 2020 11:43PM by Jeff_Joslin
If you have information to add to this entry, please contact the Site Historian.
![8805-A.jpg]()
Here is a little more info I found on the ‘Vintage Machinery.org’ website.
Jeff Joslin is the historian for that group.
For reducing weight on 9.2 shells
I am all ears. How interesting!
If you need more info . . . Contact - Jeff Gosling at ‘Vintagemachinery.org’
He is a very interesting and knowledgeable historian.