• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Calgary Area Meetup is set for Saturday July 12th at 10am. The signup thread is here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

What Are These?

........ I do a lot of oil changes and tire rotations. 😛

My other half has an Audi, do I have to say more😛

Hey, how’s that truck restoration coming along, is it peeking out from under the security blanket? 😉

D 😎
 
Last edited:
Unfortunately, not as much happened over the winter as I had hoped. It turns out that taking shortcuts down ladders is really hard on the body. I took the express lane down one last fall and tore my shoulder up pretty good, it's coming along, but it's been a long haul. 🙄
 
Unfortunately, not as much happened over the winter as I had hoped. It turns out that taking shortcuts down ladders is really hard on the body. I took the express lane down one last fall and tore my shoulder up pretty good, it's coming along, but it's been a long haul. 🙄

Oh that sucks, well look on the bright side it gives you more time to hang out around here and gab!

Mend well!

D 😎
 
Last edited:
Oh that sucks, well look on the bright side it gives you more time to hang out around here and gab!

Mend well!

D 😎

Interesting perspective. The more time members spend on here the more F'd up they must be........

I know, that's not what you said, but......

Might even be true. 🙄
 
Interesting perspective. The more time members spend on here the more F'd up they must be........

I know, that's not what you said, but......

Might even be true. 🙄

Uh oh, are you saying that I need to cut down on my screen time and join the real world? It's scary out there, there are Susquatches running free......😳

D 😎
 
Unfortunately, not as much happened over the winter as I had hoped. It turns out that taking shortcuts down ladders is really hard on the body. I took the express lane down one last fall and tore my shoulder up pretty good, it's coming along, but it's been a long haul. 🙄
Taking stairs too fast has a similar effect: total reverse replacement. 6 more weeks of PT, but not back 95% until the end of the year; at least it wasn’t my dominant arm!
 
Taking stairs too fast has a similar effect: total reverse replacement. 6 more weeks of PT, but not back 95% until the end of the year; at least it wasn’t my dominant arm!
I blame it all on gravity, we really need to ban that crap as it just ain't safe. 🙄 Unfortunately it was my dominant arm, I could still chain up a tandem truck, but there was no way I could change a light bulb. Lifting it over my head or reaching out was out of the question, strangely though I could upshift my pickup 2 to 3 just fine, but couldn't downshift 4-3 to save my soul.🙁
 
The Starrett #196 indicator sets was a requirement for millwrights before lasers. I have couple of sets. In order for couplings to last, they have to in alignment . The ones I most often had to align were pumps and motors . Big ones were easy, the little ones I swore were on springs.
 
The Starrett #196 indicator sets was a requirement for millwrights before lasers. I have couple of sets. In order for couplings to last, they have to in alignment . The ones I most often had to align were pumps and motors . Big ones were easy, the little ones I swore were on springs.
Never used them, but I remember watching some of the many dozens of motor/pump shafts being aligned at the Hershey Virginia plant in the early 80’s.
 
Oil refineries required cross dials , more complicated math, but pulp mills were happy with the simple rim and face. I think that was all the engineers understood. It was a fair bit of trial and error. If the sun shone on your motor, your numbers were out. Now with lasers , you set up and the display will tell you your shim packs, even soft foot.
 
Any links to more knowledge on this?

It isn't the way I would do it. But I'm sure it would work just fine. If asked how, I'd run the button on the bed with the dial facing up. But I think other methods are easier.

I love this indicator for checking the bedding of an internal spiral tube. I'll show you how I do that next time you are here. If you or others want, I could post about it on the members only forum.

If you want, I'll also show you how to tram a mill with it when you are here. But it would be interesting to hear how @Stuart Samuel does it.
 
I use a kit like that to check bedding stress.
I was unaware that the FAR NORTHERN Susquatches ~had~ *issues* with their Beds • • • • Ours below the 48th just look for a bunch of branches from Pines, although they WILL use FUR BRANCHES for a single Nights sleep • • • • • • • • • • • • • • (A QUICK look both ways, EXIT stage Left)

philip, from the Great Pacific NorthWET, Oregon, USA
"Wood Working" & "Electronics", since 1957, Metal working added, 1968
 
Back
Top