Wanted: 4-3-2 step pulley w/ 1/2" bore

[TorontoBuilder]

The pulley on my vintage motor already has a bent flange and I'm likely to do more damage in getting it removed from the motor so I'll likely be needing a new pulley.

Any old vintage 3 step pulley with the major diameters of 4", 3" and 2", cast aluminum or iron should do the trick

 

[Martin w]

I have one ,you can have if you can get someone to get to the Niagara area to pick up. I’ll double check that it is the correct size.
Martin
Edit 4-1/2”-2”-1/2” bore. It’s a four step

 

[TorontoBuilder]

I have one ,you can have if you can get someone to get to the Niagara area to pick up. I’ll double check that it is the correct size.
Martin
Edit 4-1/2”-2”-1/2” bore. It’s a four step

I appreciate that, but I'm unsure it will fit the length of shaft my motor has.

 

[Martin w]

I have a smaller one also. But it 3” to 2” and has a 19 mm bore

 

[Ishmael]

I have a slightly smaller 3-step pulley. Odd bore, but maybe it can be shimmed....

 

[TorontoBuilder]

I use it just about every day. Whether or not its use will help @TorontoBuilder remains to be seen.

I'll see if I can find a perfect pulley but keep yours in the back of my mind.

 

[Ishmael]

The pulley is free if you want it. Let me know.

 

[mickeyf]

I also have a 1/2 in bore 4 step in my collection that I think pretty much includes those sizes or at least covers that range. "Major diameter" means "the outside of the flange"?

 

[TorontoBuilder]

I also have a 1/2 in bore 4 step in my collection that I think pretty much includes those sizes or at least covers that range. "Major diameter" means "the outside of the flange"?

yep outside of flange...

 

[mickeyf]

yep outside of flange...

So, what i have is 2", 2.75", 3.25" and 4.25", 1/2 " bore. You'll probably find something closer to what you want, and physically closer, but it not it's here for postage if there ever is a Canada Post again...