-
Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Used and abused Robin bench vise
- Thread starter DPittman
- Start date
DPittman
Ultra Member
Okay it looks like I'm going to be successful in getting all broken jaw bolts out and rethreaded so now I am ready for some welding advise!
I have no TIG, only small MIG, AC/DC stick and acetylene/oxygen welding capabilities. I expect stick machine with some sort of nickel electrode is what I should do?
I wondering about the large amount of build up i will need to do it need to be over 1" thick in areas and both above and below the jaw needs material replaced that I will then plan on machining.
I understand preheating, peening and slow cooling will be important.
I have no TIG, only small MIG, AC/DC stick and acetylene/oxygen welding capabilities. I expect stick machine with some sort of nickel electrode is what I should do?
I wondering about the large amount of build up i will need to do it need to be over 1" thick in areas and both above and below the jaw needs material replaced that I will then plan on machining.
I understand preheating, peening and slow cooling will be important.