Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
I would like to say two important points in my actual operation: 1. Deflection Angle, I initially made 1.05 degrees, in the actual operation, the small pallet was 0.5 degrees off, so the actual deflection Angle I used was 1.65 degrees. 2. Bearing selection should focus on axial strength, so I will re-optimize the bearing configuration in the future production.