Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
Heading over there this afternoon! Getting both sets of parallels, brass sheet, a bit of A2, micarta, an inside mic, maybe some files if they’re decent.
He has a demagnetizer listed. I’m not interested at $250, but I’m curious. Has anyone used one? (It’s the powered, electromagnet type)
Phenolic sheet:
1/16”, 40.5” x 38.5”
1/8”, 27.75” x 37.5”
1/4”, two discs 30.5” diameter
3/8”, one disc same diameter
1”, variety of chunks, biggest is 48.25” x 22”.
Aluminum bronze (marked and confirmed), 3/8” x 12” x 40”.
Brass:
1/8” sheet, irregular shape, 60” x 31”
1/4” sheet, same, 16” x 16”.
Copper: Offcuts of 1/8” and 3/32” sheet.
A2: 3/8” x 2” x 36.5”.
Annular cutters, Fein brand, all 2” length: 7/16”, 9/16”, 11/16”, 13/16”, 15/16”. Three lightly used, other two still in wax from sharpening.
Inside mic, 1”-2”, with setting ring. I was mostly interested in the ring, but looking closer, the mic is Mitutoyo, despite the generic box.
1/32” and 1/8” parallel sets. Latter dinged up, but not terrible.
12” Nicholson USA file, tolerable shape, thrown in for free.
www.kijiji.ca
