test

Proxule

Ultra Member
Not allowed to spray foam up in the in that area where the truss meets the soffit vents.
You need to leave enough gap with baffles so the air can freely enter and circulate.
No air circulation means HOT..... So hot your shingles will curl

gluck
 

TorontoBuilder

Ultra Member
Not allowed to spray foam up in the in that area where the truss meets the soffit vents.
You need to leave enough gap with baffles so the air can freely enter and circulate.
No air circulation means HOT..... So hot your shingles will curl

gluck
this architect and myself are experts in the field who have been working daily with code officials and know what is being shown in the above image.

Baffles are being installed evenly around the perimeter of the eaves and spray foamed in place to maintain an overall ventilation area of 1:300 of the insulated ceiling area as per code, while also addressing the need to provide adequate insulation at the eaves in order to meet the EE requirements of the code.
 
Last edited by a moderator:

Proxule

Ultra Member
Unlike you, this architect and myself are experts in the field who have been working daily with code officials and know what is being shown in the above image.

Baffles are being installed evenly around the perimeter of the eaves and spray foamed in place to maintain an overall ventilation area of 1:300 of the insulated ceiling area as per code, while also addressing the need to provide adequate insulation at the eaves in order to meet the EE requirements of the code.

I feel enlightened and very humbled!
 

ShawnR

Ultra Member
Premium Member
So what is the test of? Am I missing an earlier post or carry over from some other thread?
 
Top