Stanko radial arm drill, Chatham, ON

[JustaDB]

Stanko radial arm drill | Power Tools | Chatham-Kent | Kijiji

Stanko 6’ radial arm,575 volt,new coolant system,completely serviced,oils replaced.Everything works as should with little sign of use.Will consider trades for metal lathes and mills. Located near Chatham under power. Can load.8500.00 obo. 519-380-5655

www.kijiji.ca

 

[YYCHM]

 

[140mower]

To bad @Susquatch is done with that drawbar, it looks like a necessary bit of tooling to me......

 

[Susquatch]

To bad @Susquatch is done with that drawbar, it looks like a necessary bit of tooling to me......

Especially that obvious orange accessory behind it.......

 

[historicalarms]

My thoughts on this machine is that with an old mill drill base bolted to it , it would make an excellent milling machine with geared speed changes.

 

[Susquatch]

My thoughts on this machine is that with an old mill drill base bolted to it , it would make an excellent milling machine with geared speed changes.

Unless one already has a Bridgeport.... LOL!

 

[Tom Kitta]

I have the much smaller version of this, 3' arm vs. 6'

They are difficult to move. Like very difficult. They also require specific large projects to be of use.

This one is in better shape than mine - mine has the box - but the previous owner drilled like 100 holes into that box (!!!).

I have twin vise setup on my box.

This is one of the least used machines in my shop.