• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Standard modern utilathe9 feed selector

P

pikespeedshop

New Member
Hey guys i have a standard morden utilathe 9 model a
I’m missing the feed selector arm does anyone as one frommpartind a machine ….
Or picture with detail mesurement so I can make one..

Thanks
 
Last edited:
YYCHM said:
Page 11? Are you sure? Page 11 lists saddle parts. Page 10 lists apron parts. I have the apron parts you listed..... I think.
Click to expand...
yes sorry it page 10 of the manual but 11 of thee PDF
part number.webp
 
all right thanks to @YYCHM I now have a power feed selector...
but seem like the clutch engament is slipping do anyone knows if an ajustment is possible, just possibly need a good cleaning or the part may be just to worn out....
 
pikespeedshop said:
all right thanks to @YYCHM I now have a power feed selector...
but seem like the clutch engament is slipping do anyone knows if an ajustment is possible, just possibly need a good cleaning or the part may be just to worn out....
Click to expand...

I've never adjusted mine, but I'm sure it can be done. @Hruul , @YotaBota, @RobinHood can you shed any light on this?

I have spare clutch parts if you need them.

Craig
 
Last edited:
AFAIK there is no adjustment, you tighten the clutch knob until the carriage or cross slide moves. If it won't tighten up enough then you could put a spacer between the clutch knob and the handle and see if it's any better. If that doesn't work then the clutch plates could be worn out and in need of replacing. They should be to hard to duplicate as I think they're just brass plate.

The pictures show how the gear fits over the clutch plates, next is the clutch plates with the spacer that clamps them tight and the clutch knob that does the tightening.

P1010596.JPG
P1010597.JPG
P1010598.JPG



Hope this helps.
 
You must log in or register to reply here.
Back
Top