• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

simple cut knurling tool

mjautek

Super User
Quick project done while procrastinating doing anything actually useful last weekend – made a little cut knurling tool.

I have a few of these 30° knurling wheels that I got from a pile of junk somewhere and years ago I made a ordinary looking (form) knurling tool with them – but since the resulting knurl has a 30° angle it looks kinda weird.

So I figured if I can mount the knurl at a 30° angle then due to the tilt angle it’ll work as a cut knurling tool. I made a round bar to hold the wheel and a matching tool holder for it; split on the bottom and clamped with a few m4 screws. the knurling wheel is held in with a AN bolt and the radial clearance is pretty much spot on.

DSC05522.JPG
yeah there's 3 holes and 2 clamping screws cause I only had 2 screws. also i was gonna use set screws but after i did the bore i realized that would look ugly and then went with the split design... which expains why there's 0 extra room around the counterbores

DSC05514.JPG
yeah eh

I used to hate knurling – all of the cheapo knurling tools I’ve used before make knurls that look absolutely disgusting. but this thing is pretty okay – the only funny business is that the helix of the knurl is “backwards” so to get the cutting effect I run the knurl towards the tailstock…

2 thoughts (now that im not at the shop):
1. so you can in fact buy something like this on aliexpress for 50$. but it's cool to make stuff instead of buying it
2. maybe i should have tilted the wheel out of parallel from the spindle axis? the chips get squished into the workpiece by the wheel so the knurl is not as clean as it could be i guess

still have some tuning to do i guess but im posting mostly cause i'm not at the shop and bored ...

edit:
oh ya here's a better example pic:

DSC05523.JPG
not bad but could be cleaner ? this is 6061 alu, i did try steel and it looked pretty similar. next to a couple of things with scalloping i had lying around - i think scalloping looks more "high end" but it is way more effort so i'm pretty stoked to have a non cheese knurling tool finally...
 
Back
Top