• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Show us your shops!

Oval Robber Seal on the bottom of the door, outside view:

My doors and seals look more or less identical. But my sill is just flat concrete with no slope.

Reminds me of a basement I used to know :/ I have seen where shops have a 'dutch drain' principle in problem areas like that.

Ya, I like those drains. But it was built long before we bought the place. Not really practical now.

You should cut some sloping channels running outside to drain those puddles. A couple simple saw cuts should solve those problems i'd think. Caulk them in the winter if you're worried about heat loss.

Do you mean saw slits Dan? If so, I never considered that. There is one there already for crack control but it hasn't cracked. It is full of dirt though. Outside is a dirt barn yard. You can see the dirt and sand on the towels. I'm not sure how well more slits would work with all that dirt. Perhaps heavily sloped slits would be self cleaning....

On the flip side, I always wanted a concrete saw. Sounds like a good excuse to buy one!

So kwitcherbitchen and rotate your damn shops, already.

Finally a really practical solution...... Don't know why I never thought of that!

Around here, there are days when the wind does that for you!
 
Yeah, just saw slits. You know where the water pools, so just run some sloping saw slits from there to the outside. Dirt will fill, but blowing them out, or brushing them should keep them clean during rainy season. Might look like ass, but it beats laying towels down.
 
Do you glue these rubber thresholds down to the slab?
Yes, the ones I bought came with a tube of adhesive for the job. It held up well for a bout 7-8 years before part of it came loose on my 16' door. I removed the strip, cleaned it all up well and re-glued it. I think when I redid it I just used some PL adhesive.
 
Yes, the ones I bought came with a tube of adhesive for the job. It held up well for a bout 7-8 years before part of it came loose on my 16' door. I removed the strip, cleaned it all up well and re-glued it. I think when I redid it I just used some PL adhesive.
Good to know thanks!
I wish I had seen this before winter had arrived. My new garage floor slab slopes from the doors to a central drain, when it rains water gets in under the overhead doors. I will have to install these in the spring.
 
Mine seals good except for the righthand side that drops about an inch I’ve been placing some ply down to take up the space.
Hmm I just had a idea I could take some wood and put a taper on it to fit between the garage door and the seal maybe.
 
Back
Top