• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.

Show us your shops!

Storm door?

Each entrance of my house has a storm door and protects against the elements all year. Keeps the rain out in the summer and in the winter the interior doors don't ice up when -30.
Yes I have thought about that and know it would fix the problem....but a couple of things I don't like....
My man door is a 36" steel and steel frame door so a custom made screen door would be required.
I don't like the idea of having another door to open and move around.

The other thing I think would work but is not easy to implement is a roof overhang. But it is particularly complicated job. But would also be nice that I wouldn't have as big of a pile of snow right outside my door every time snow slides off the big roof (60 ft).
 
I try to not have any doors under a sloped roof, if the door opens out , you may not get it open, when needed, as snow is blocking it. Have you ever been hit by snow coming off a roof? Not fun! If the door opens in, may still not get out it, over a pile of snow.
Worst I have seen, was at a shop I started working at that had 3 inch’s of ice on the floor. The snow and ice off the roof had made a dam in front of the garage doors, with a bit of thaw, the water hit the dam and ran into the shop. We were not allowed to run the furnace over nite, so a stating ring in the morning.
I bust the dam out over a few days, and chased the water out of the shop though the day. Took most of 2weeks to get the floor ice free. It was like climbing into a deep freeze if you needed to go under equipment to work on it. DAM good thing I was young then!
 
You can plainly see my "shop cluster" in the photo's YYC poster in Dave's "lead bullet sizing" thread....looks like almost garbage trip day coming up for the pile outside the shop door.
 
I put trench drains in my new garage vehicle parking area, a shallow slope of about 3%, still needs to squeegee a couple shallow puddles. My shop half is poured level.
One downside to a sloped floor; pushing my 800lb motorcycle out of the garage backwards, surprisingly a shallow slope has a lot of resistance to get a bike to move backwards.
 
One downside to a sloped floor; pushing my 800lb motorcycle out of the garage backwards, surprisingly a shallow slope has a lot of resistance to get a bike to move backwards.

My bikes are under 600lbs each but this is also something I was thinking about and having to annoyingly dance them around in my currently aggressively slopped front garage. In the future motorcycle bay I might just slope towards the garage door which would make the second possible drain location less useful. I'm thinking I'd rather squeegee once in awhile then to struggle with the bikes if if I move them to other areas. I think my needs of the drain may be significantly less than others dealing with farm equipment, cars etc.

1795021615859.png
 

Attachments

  • 1795021441108.png
    1795021441108.png
    384 KB · Views: 0
Back
Top