Sherline rotary table, $200, York, ON

[JustaDB]

Sherline rotary table | Power Tools | City of Toronto | Kijiji Classifieds

Sherline rotary table/ indexing head. Good condition. No issues

www.kijiji.ca

 

[YYCHM]

 

[Dan Dubeau]

Cute, Is that thread a #4-40, or #-6-32.....

 

[lucsimoneau]

Was a small manufacturing project for my classroom but just never made it to the shop floor:

 

[ChazzC]

Cute, Is that thread a #4-40, or #-6-32.....

3/4”-16 to mount a chuck.

 

[PeterT]

Sherline uses adapter plugs which screw into the RT center with the 3/8 thread, but the plug concentricity is via the cylindrical boss portion which closely mates a hole. Then a different larger thread for the topside to adapt to chucks or whatever. But yes the Sherline chucks are 3/4-16. I made a plate for the RT & mount into my 5" mill vise for fast setups. Its a nice little RT, much better quality than some of the offshore stuff., but it costs more especially with USD FX. Personally I find the Sherline chucks just a bit small for a lot of work. Not so much the diameter grip, but their jaws are not very tall. They do sell taller jaws & I believe machineable jaws, but more $. Anyways just trying to say you aren't necessarily locked into Sherline chucks but the RT table diameter might limit what you can mount via T-nut slots

Rotary Tables - Sherline Products

Sherline Manual and CNC Rotary Tables Sherline offers one of the finest small rotary tables on the market. It is available in manual or stepper motor drive modes. It can even be purchased with its one controller to be used … Continued

www.sherline.com

Chuck Adapters for Rotary Table - Sherline Products

About the Rotary Table Chuck Adapters You can attach a 1/4″ or 3/8″ drill chuck, an older Unimat chuck with 12 x 1 mm or 14 x 1 mm threads, or a 1/2-20 Sears chuck to your Sherline rotary table. … Continued

www.sherline.com

 

[ChazzC]

Still haven’t gotten around to posting this (soon since I should be able to start typing with two hands), but in the meantime here it is on Hobby-Machinist:

https://www.hobby-machinist.com/threads/tools-tooling.113630/post-1168990

A plethora of things that can be mounted on the Sherline 4” RT.