looking_west
New Member
Hello All
I need some guide bushings made for a special application of a woodworking dowel jig.
The pictures show the general shape: Large Dia approx: 13mm, Small Dia approx 12mm, Length OA approx 33mm
There is a little grub screw dimple in one side.
I would provide example for you to take real measurements from.
Material is some kind of hardened steel but I don't imagine its critical for this application.
What I need are some sets with same outside dimns with smaller ID bore: 3mm, 5mm and posibly 6mm
I need about 12 of each size.
I am located in west GTA (High Park) but am happy to do this remotely through Canada Post or courier.
PM me here if you can help
Thanks much
I need some guide bushings made for a special application of a woodworking dowel jig.
The pictures show the general shape: Large Dia approx: 13mm, Small Dia approx 12mm, Length OA approx 33mm
There is a little grub screw dimple in one side.
I would provide example for you to take real measurements from.
Material is some kind of hardened steel but I don't imagine its critical for this application.
What I need are some sets with same outside dimns with smaller ID bore: 3mm, 5mm and posibly 6mm
I need about 12 of each size.
I am located in west GTA (High Park) but am happy to do this remotely through Canada Post or courier.
PM me here if you can help
Thanks much
