• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Radius turning tool project

My new lathe doesn't have t-slots in the cross slide and the top of the cross slide is about 1/4" higher than my old lathe so I had to rework my radius turner. I measured the center height of the spindle and machined the material off the bottom of the tool bit holder to get the height correct. That gave me a chance to break out my vintage Browne and Sharp height gage. The base will now have to be bolted down using the same studs that hold the tool post so I'll have to make something to keep the swarf out of the openings. I haven't had a chance to try it out yet but here's some pics.
20190406_120346.jpg
20190406_121629.jpg
20190407_103340.jpg
20190406_121622.jpg
 
JC>My new lathe doesn't have t-slots in the cross slide and the top of the cross slide

I didn't even notice that before. Is your cross slide dovetailed on the sides (arrows) to hold things gib style or is it 90-deg square?
I always thought I would be mounting things to my T-slots but so far haven't had a solid requirement. A pseudo-travelling steady is brewing in my brain though.
 

Attachments

  • 2019-04-14_21-48-45.jpg
    2019-04-14_21-48-45.jpg
    29.5 KB · Views: 0
Sorry Peter, I somehow missed your question and lost track of this thread. The cross slide has no slots of any kind.
 
You must log in or register to reply here.
Back
Top