• Scam Alert. Members are reminded to NOT send money to buy anything. Don't buy things remote and have it shipped - go get it yourself, pay in person, and take your equipment with you. Scammers have burned people on this forum. Urgency, secrecy, excuses, selling for friend, newish members, FUD, are RED FLAGS. A video conference call is not adequate assurance. Face to face interactions are required. Please report suspicions to the forum admins. Stay Safe - anyone can get scammed.
  • Several Regions have held meetups already, but others are being planned or are evaluating the interest. The Ontario GTA West area meetup is planned for Saturday April 26th at Greasemonkeys shop in Aylmer Ontario. If you are interested and haven’t signed up yet, click here! Arbutus has also explored interest in a Fraser Valley meetup but it seems members either missed his thread or had other plans. Let him know if you are interested in a meetup later in the year by posting here! Slowpoke is trying to pull together an Ottawa area meetup later this summer. No date has been selected yet, so let him know if you are interested here! We are not aware of any other meetups being planned this year. If you are interested in doing something in your area, let everyone know and make it happen! Meetups are a great way to make new machining friends and get hands on help in your area. Don’t be shy, sign up and come, or plan your own meetup!

Milltronics Partner 1

Alexander

Alexander

Ultra Member
Administrator
Milltronics partner one CNC milling machine. Features:
12 tool automatic tool changer,
6K rpm 7.5hp milling spindle with high and low range,
X travel is 34" Y travel is 13.5" and the Z travel is over 18".
15 gallon coolant tank with flood coolant
Upgraded LCD display
Upgraded USB floppy emulator
Easily fits through a 7 foot high garage door. The machine is currently wired for 220v single phase power. Can be seen under power
Asking $8000
comes with A Vice, manual rotary table, 12 cat 40 tool holders, and a wide range of milling tools I have purchased while running this machine
 

Attachments

  • 20230806_093757.jpg
    20230806_093757.jpg
    374.2 KB · Views: 41
  • 20230806_093808.jpg
    20230806_093808.jpg
    293.4 KB · Views: 41
  • 20230806_094135.jpg
    20230806_094135.jpg
    331.1 KB · Views: 41
  • 20230806_094200.jpg
    20230806_094200.jpg
    291.9 KB · Views: 40
  • 20230806_101016.jpg
    20230806_101016.jpg
    366.4 KB · Views: 42
Nice!

I have pretty good experiences with a Partner 4 wi. Cent V controller, to the extent that I bought the sister machine to the one I used to run at work, when it was listed on Crown Assets.

Very much like Fadal was reputed to be, they used a LOT of off the shelf components in the drivelines for the various axiis. Dead easy to troubleshoot and fix!
 
You must log in or register to reply here.
Back
Top