Looking for a tap

[Bofobo]

What are the chances someone here has a 7/8 14tpi tap i could borrow?

 

[DPittman]

Sorry my biggest only goes to 3/4". If you're doing steel you will want a decent quality tap for that big of thread. Probably by not do-able with my set anyhow.

 

[Janger]

Same here. Can you chuck it up on your lathe and do it that way? Trickier and more work for sure. @johnnielsen have you got one ?

 

[Everett]

Got a plug and a bottoming, you'd be welcome to use either/both on the odd chance anyone here knows someone headed your way from Edmonton area to run pony express, then just mail it/them back

 

[Bofobo]

Same here. Can you chuck it up on your lathe and do it that way? Trickier and more work for sure. @johnnielsen have you got one ?

I could single point it but i have a specific gear set up for a persistent job and never hurts to ask

 

[John Conroy]

I have a bottoming tap if that will work for you. I could get it to Calgary this week if it will work for you.

 

[Brian Ross]

I have a 7/8-14 tap you could borrow.

 

[Brian Ross]

I'm in N.W. Calgary so it would be simpler than getting it from John.

 

[DPittman]

Helpful and Impressive bunch of friends we have here huh?

 

[Bofobo]

I'm in N.W. Calgary so it would be simpler than getting it from John.

Well then, that is much simpler, Thank you!.
My thanks to John and Everett for your offers, proximity wins, you know.
Happy to be a long time member here, it is a great group!

 

[Tom Kitta]

I have 3 used taps and 3 new taps in that size. I can sell you new or used or you can just borrow it.

I am in NE Calgary.