Lathe $500 Edmonton

[combustable herbage]

Lathe $500 or best offer | Power Tools | Edmonton | Kijiji

As Tom would say might as well be free.

 

[YotaBota]

Another shear pin? Tom is probably on his way to get it.lol

 

[thriller007]

I just copied this ad to post here as well. lol

 

[Tom O]

Ad is still up 6 hrs so far

 

[calgaryguy]

If it was YYC I'd likely be on it like a fat kid on a candybar

 

[YYCHM]

If it was YYC I'd likely be on it like a fat kid on a candybar

It's not that far away Ask one of the EDM members to have a look see and provide an prognosis.

 

[calgaryguy]

Waiting for the 'right' one in YYC.

 

[Tom O]

Wonder why the chuck has no jaws

 

[Susquatch]

Wonder why the chuck has no jaws

I downloaded the photo and then blew it up. The Jaws look small but they are there.

 

[Susquatch]

Looks like a hell of a deal.

What does yyc & edm stand for?

 

[combustable herbage]

YYc is the airport code for Calgary Yeg is Edmonton.

 

[historicalarms]

Exact same lathe as i have other than it is missing the chip pan that came with them.

i havent read the add but am surmising by a couple of posts concerning a shear pin that it doesnt turn the headstock....it could be a shear pin ( I wouldnt know even where it is as I have never broken one) but , from My experience with that very lathe, it is possible that the gear change forks have loosened from the shifting shaft....quite common with these lathes.....1/2 hr fix.

 

[Susquatch]

YYc is the airport code for Calgary Yeg is Edmonton.

OH, I see. Very odd....... , but whatever works for you.....

 

[YYCHM]

OH, I see. Very odd....... , but whatever works for you.....

EDM is just short hand for Edmonton.

 

[Susquatch]

And Cal for Calgary?

 

[calgaryguy]

OH, I see. Very odd....... , but whatever works for you.....

Not at all.

YYC, YEG, YVR, etc are all handy ways to write out long city names.

 

[Scattered Parts]

YQR

The Queen City

Regina

 

[historicalarms]

Exact same lathe as i have other than it is missing the chip pan that came with them.

i havent read the add but am surmising by a couple of posts concerning a shear pin that it doesnt turn the headstock....it could be a shear pin ( I wouldnt know even where it is as I have never broken one) but , from My experience with that very lathe, it is possible that the gear change forks have loosened from the shifting shaft....quite common with these lathes.....1/2 hr fix.

Also missing is the kick board divider between the two stands, pretty much the only real benefit to having it is it sturdies up the lathe stands

 

[Proxule]

Also missing is the kick board divider between the two stands, pretty much the only real benefit to having it is it sturdies up the lathe stands

thats right